Publications › Institute of Applied Mechanics

Akar Ö., Willner K.:
Investigation of string motions of bowed string instruments: A finite element approach
38th IMAC, A Conference and Exposition on Structural Dynamics, 2020 (Houston, TX, 10. February 2020 - 13. February 2020)
In: Gaetan Kerschen, Matthew R.W. Brake, Ludovic Renson (ed.): Conference Proceedings of the Society for Experimental Mechanics Series 2021
DOI: 10.1007/978-3-030-47626-7_7
Weidauer T., Willner K.:
Numerical treatment of frictional contact in ALE formulation for disc brake assemblies
In: Mechanical Systems and Signal Processing 145 (2020), Article No.: 106916
ISSN: 0888-3270
DOI: 10.1016/j.ymssp.2020.106916
Baloglu MV., Ziegler M., Franke J., Willner K.:
Determination of equivalent transversely isotropic material parameters for sheet-layered lamination stacks
In: Mechanical Systems and Signal Processing 145 (2020), Article No.: 106915
ISSN: 0888-3270
DOI: 10.1016/j.ymssp.2020.106915
McBride AT., Davydov D., Steinmann P.:
Modelling the flexoelectric effect in solids: A micromorphic approach
In: Computer Methods in Applied Mechanics and Engineering 371 (2020), Article No.: 113320
ISSN: 0045-7825
DOI: 10.1016/j.cma.2020.113320
Distler T., Schaller E., Steinmann P., Boccaccini AR., Budday S.:
Alginate-based hydrogels show the same complex mechanical behavior as brain tissue
In: Journal of the Mechanical Behavior of Biomedical Materials 111 (2020), Article No.: 103979
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2020.103979
URL: https://www.sciencedirect.com/science/article/abs/pii/S1751616120305312
Akar Ö., Willner K.:
Investigation of the Helmholtz Motion of a Violin String: A Finite Element Approach
In: Journal of Vibration and Acoustics-Transactions of the Asme 142 (2020)
ISSN: 1048-9002
DOI: 10.1115/1.4047417
Verhnjak O., Hriberšek M., Steinmann P., Ravnik J.:
A novel two-way coupling model for Euler-Lagrange simulations of multiphase flow
In: Engineering Analysis With Boundary Elements 119 (2020), p. 119-132
ISSN: 0955-7997
DOI: 10.1016/j.enganabound.2020.07.012
Burkhardt C., Soldner D., Mergheim J.:
A comparison of material models for the simulation of selective beam melting processes
In: Procedia CIRP 94 (2020), p. 52-57
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.011
Scherb D., Kurz M., Fleischmann C., Wolf A., Sesselmann S., Miehling J., Wartzack S.:
Patientenspezifische Modellierung des passiven Bewegungsapparates als Grundlage für die präoperative Abschätzung postoperativer Folgeerscheinungen des endoprothetischen Hüftgelenkersatzes
31st Symposium Design for X (DFX2020) (Virtuell, 16. September 2020 - 17. September 2020)
In: Dieter Krause; Kristin Paetzold; Sandro Wartzack (ed.): Proceedings of the 31st Symposium Design for X (DFX2020) 2020
DOI: 10.35199/dfx2020.1
URL: https://www.designsociety.org/publication/43019/Patientenspezifische+Modellierung+des+passiven+Bewegungsapparates+als+Grundlage+fÃ¼r+die+prÃ¤operative+AbschÃ¤tzung+postoperativer+Folgeerscheinungen+des+endoprothetischen+HÃ¼ftgelenkersatzes
Budday S., Ovaert T., Holzapfel GA., Steinmann P., Kuhl E.:
Fifty Shades of Brain: A Review on the Mechanical Testing and Modeling of Brain Tissue
In: Archives of Computational Methods in Engineering 27 (2020), p. 1187–1230
ISSN: 1134-3060
DOI: 10.1007/s11831-019-09352-w
URL: https://link.springer.com/article/10.1007/s11831-019-09352-w
Ries M., Steinmann P., Pfaller S.:
Characterization of Polystyrene Under Shear Deformation Using Molecular Dynamics
In: Developments and Novel Approaches in Nonlinear Solid Body Mechanics, Springer, Cham, 2020, p. 219-229
ISBN: 9783030504595
DOI: 10.1007/978-3-030-50460-1_14
Kergaßner A., Burkhardt C., Lippold D., Kergaßner M., Pflug L., Budday D., Steinmann P., Budday S.:
Memory-based meso-scale modeling of Covid-19
In: Computational Mechanics (2020)
ISSN: 0178-7675
DOI: 10.1007/s00466-020-01883-5
Davydov D., Kronbichler M.:
Algorithms and Data Structures for Matrix-Free Finite Element Operators with MPI-Parallel Sparse Multi-Vectors
In: ACM Transactions on Parallel Computing 7 (2020), p. 1-30
ISSN: 2329-4949
DOI: 10.1145/3399736
Zabihyan R., Mergheim J., Pelteret JP., Brands B., Steinmann P.:
FE2 simulations of magnetorheological elastomers: influence of microscopic boundary conditions, microstructures and free space on the macroscopic responses of MREs
In: International Journal of Solids and Structures 193-194 (2020), p. 338-356
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2020.02.015
Spannraft L., Ekh M., Larsson F., Runesson K., Steinmann P.:
Grain boundary interaction based on gradient crystal inelasticity and decohesion
In: Computational Materials Science 178 (2020), Article No.: 109604
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2020.109604
Caspari M., Landkammer P., Steinmann P.:
Shape Optimization of a Backward Extrusion Process Using a Non-Invasive Form Finding Algorithm
In: Procedia Manufacturing 23rd International Conference on Material Forming (2020), p. 873-880
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.04.273
Hasegawa R., Mehnert M., Mergheim J., Steinmann P., Kakimoto K.:
Behavior of vibration energy harvesters composed of polymer fibers and piezoelectric ceramic particles
In: Sensors and Actuators A-Physical 303 (2020), Article No.: 111699
ISSN: 0924-4247
DOI: 10.1016/j.sna.2019.111699
Cui Y., Ravnik J., Hriberšek M., Steinmann P.:
Towards a unified shear-induced lift model for prolate spheroidal particles moving in arbitrary non-uniform flow
In: Computers & Fluids 196 (2020), Article No.: 104323
ISSN: 0045-7930
DOI: 10.1016/j.compfluid.2019.104323
Çelik M., Artan R.:
An investigation of static bending of a bi-directional strain-gradient Euler–Bernoulli nano-beams with the method of initial values
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems (2020)
ISSN: 0946-7076
DOI: 10.1007/s00542-020-04926-2
Misra JC., Mallick B., Steinmann P.:
Temperature distribution and entropy generation during Darcy–Forchheimer–Brinkman electrokinetic flow in a microfluidic tube subject to a prescribed heat flux
In: Meccanica (2020)
ISSN: 0025-6455
DOI: 10.1007/s11012-020-01152-y
Papastavrou A., Schmidt I., Steinmann P.:
On biological availability dependent bone remodeling
In: Computer Methods in Biomechanics and Biomedical Engineering (2020)
ISSN: 1025-5842
DOI: 10.1080/10255842.2020.1736050
Liu Z., McBride A., Saxena P., Steinmann P.:
Assessment of an isogeometric approach with Catmull–Clark subdivision surfaces using the Laplace–Beltrami problems
In: Computational Mechanics (2020)
ISSN: 0178-7675
DOI: 10.1007/s00466-020-01877-3
Papastavrou A., Schmidt I., Deng K., Steinmann P.:
On age-dependent bone remodeling
In: Journal of Biomechanics (2020), Article No.: 109701
ISSN: 0021-9290
DOI: 10.1016/j.jbiomech.2020.109701
Javili A., Firooz S., McBride AT., Steinmann P.:
The computational framework for continuum-kinematics-inspired peridynamics
In: Computational Mechanics (2020)
ISSN: 0178-7675
DOI: 10.1007/s00466-020-01885-3
Çelik M., Artan R.:
Buckling analysis of a bi-directional strain-gradient Euler–Bernoulli nano-beams
In: International Journal of Structural Stability and Dynamics (2020), Article No.: S021945542050114X
ISSN: 0219-4554
DOI: 10.1142/S021945542050114X
Bruna-Rosso C., Mergheim J., Previtali B.:
Finite element modeling of residual stress and geometrical error formations in selective laser melting of metals
In: Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science (2020)
ISSN: 0954-4062
DOI: 10.1177/0954406220943225
Budday S., Kuhl E.:
Modeling the life cycle of the human brain
In: Current Opinion in Biomedical Engineering (2020)
ISSN: 2468-4511
DOI: 10.1016/j.cobme.2019.12.009
URL: https://www.sciencedirect.com/science/article/pii/S2468451119300832?via=ihub
Comellas Sanfeliu E., Budday S., Pelteret JP., Holzapfel GA., Steinmann P.:
Modeling the porous and viscous responses of human brain tissue behavior
In: Computer Methods in Applied Mechanics and Engineering 369 (2020), Article No.: 113128
ISSN: 0045-7825
DOI: 10.1016/j.cma.2020.113128
URL: https://www.sciencedirect.com/science/article/pii/S0045782520303133
Budday S., Sarem M., Starck L., Sommer G., Pfefferle J., Phunchago N., Kuhl E., Paulsen F., Steinmann P., Shastri VP., Holzapfel GA.:
Towards microstructure-informed material models for human brain tissue
In: Acta Biomaterialia 104 (2020), p. 53-65
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2019.12.030
URL: https://www.sciencedirect.com/science/article/pii/S1742706119308682?via=ihub
Liao Z., Hossain M., Yao X., Mehnert M., Steinmann P.:
On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer
In: International Journal of Non-Linear Mechanics 118 (2020), Article No.: 103263
ISSN: 0020-7462
DOI: 10.1016/j.ijnonlinmec.2019.103263
Davydov D., Pelteret JP., Arndt D., Kronbichler M., Steinmann P.:
A matrix-free approach for finite-strain hyperelastic problems using geometric multigrid
In: International Journal for Numerical Methods in Engineering (2020)
ISSN: 0029-5981
DOI: 10.1002/nme.6336
Pivovarov D., Zabihyan R., Mergheim J., Willner K., Steinmann P.:
On periodic boundary conditions and ergodicity in computational homogenization of heterogeneous materials with random microstructure
In: Computer Methods in Applied Mechanics and Engineering 357 (2019)
ISSN: 0045-7825
DOI: 10.1016/j.cma.2019.07.032
Pfaller S., Kergaßner A., Steinmann P.:
Optimisation of the Capriccio Method to Couple Particle- and Continuum-Based Simulations of Polymers
In: Multiscale Science and Engineering (2019)
ISSN: 2524-4523
DOI: 10.1007/s42493-019-00028-y
Akar Ö., Willner K.:
Application of the fast nonlinear analysis method on a clamped beam with a cubic spring
In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
ISSN: 1617-7061
DOI: 10.1002/pamm.201900022
Ries M., Possart G., Steinmann P., Pfaller S.:
Extensive CGMD simulations of atactic PS providing pseudo experimental data to calibrate nonlinear inelastic continuum mechanical constitutive laws
In: Polymers 11 (2019), Article No.: 1824
ISSN: 2073-4360
DOI: 10.3390/polym11111824
Steinmann P., Kergaßner A., Landkammer P., Zbib HM.:
A novel continuum approach to gradient plasticity based on the complementing concepts of dislocation and disequilibrium densities
In: Journal of the Mechanics and Physics of Solids 132 (2019), Article No.: 103680
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2019.103680
Söhngen B., Willner K.:
Parameter identification of strain rate dependent hardening for sheet metals
In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
ISSN: 1617-7061
DOI: 10.1002/pamm.201900339
URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.201900339
Burkhardt C., Soldner D., Steinmann P., Mergheim J.:
An energetically consistent heat input model for additive manufacturing
In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
ISSN: 1617-7061
DOI: 10.1002/pamm.201900297
Soldner D., Mergheim J.:
Thermal modelling of selective beam melting processes using heterogeneous time step sizes
In: Computers & Mathematics with Applications 78 (2019), p. 2183-2196
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.04.036
Javili A., McBride AT., Steinmann P.:
Continuum-kinematics-inspired peridynamics. Mechanical problems
In: Journal of the Mechanics and Physics of Solids 131 (2019), p. 125-146
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2019.06.016
Dworschak F., Zirngibl C., Schleich B., Wartzack S.:
Konzept für den MBSE-Einsatz zur automatisierten Individualisierung von komplexen Produkten
30. DfX-Symposium (Jesteburg, 18. September 2019 - 19. September 2019)
In: Krause, D.; Paetzold, K.; Wartzack, S. (ed.): Beiträge zum 30. DfX-Symposium, Hamburg: 2019
DOI: 10.35199/dfx2019.24
Mehnert M., Mokarram H., Steinmann P.:
Experimental and numerical investigations of the electro-viscoelastic behavior of VHB 4905TM
In: European Journal of Mechanics A-Solids 77 (2019), Article No.: 103797
ISSN: 0997-7538
DOI: 10.1016/j.euromechsol.2019.103797
Dworschak F., Tüchsen J., Pinto D., Pop AC., Schleich B., Wartzack S.:
On Simulation Knowledge Acquisition Using Gaussian Processes for the Design of Electric Motors
29th CIRP Design 2019 (Póvoa de Varzim, 8. May 2019 - 10. May 2019)
In: Putnik, Goran D. (ed.): Procedia CIRP Volume 84 2019
DOI: 10.1016/j.procir.2019.04.266
Müller A., Oberleiter T., Willner K., Hausotte T.:
Implementation of Parameterized Work Piece Deviations and Measurement Uncertainties into Performant Meta-models for an Improved Tolerance Specification
International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
In: Proceedings of the Design Society: International Conference on Engineering Design 2019
DOI: 10.1017/dsi.2019.357
Dworschak F., Kügler P., Schleich B., Wartzack S.:
Integrating The Mechanical Domain Into Seed Approach
International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Cambridge, United Kingdom: 2019
DOI: 10.1017/dsi.2019.265
URL: https://www.cambridge.org/core/journals/proceedings-of-the-international-conference-on-engineering-design/article/integrating-the-mechanical-domain-into-seed-approach/12CFBB086E1FA0D1FCAF8477EE91B6B2
Heling B., Oberleiter T., Rohrmoser A., Kiener C., Schleich B., Hagenah H., Merklein M., Willner K., Wartzack S.:
A concept for process-oriented interdisciplinary tolerance management considering production-specific deviations
22nd International Conference on Engineering Design (ICED) (Delft, 5. August 2019 - 8. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Cambridge, United Kingdom: 2019
DOI: 10.1017/dsi.2019.351
URL: https://www.cambridge.org/core/services/aop-cambridge-core/content/view/2DD6B2058F383E18C465C8731DBE9666/S2220434219003512a.pdf/concept_for_processoriented_interdisciplinary_tolerance_management_considering_productionspecific_deviations.pdf
Cui Y., Ravnik J., Steinmann P., Hribersek M.:
Settling characteristics of nonspherical porous sludge flocs with nonhomogeneous mass distribution
In: Water Research 158 (2019), p. 159-170
ISSN: 0043-1354
DOI: 10.1016/j.watres.2019.04.017
Arora A., Kumar A., Steinmann P.:
A computational approach to obtain nonlinearly elastic constitutive relations of special Cosserat rods
In: Computer Methods in Applied Mechanics and Engineering 350 (2019), p. 295-314
ISSN: 0045-7825
DOI: 10.1016/j.cma.2019.02.032
Pivovarov D., Willner K., Steinmann P.:
On spectral fuzzy–stochastic FEM for problems involving polymorphic geometrical uncertainties
In: Computer Methods in Applied Mechanics and Engineering 350 (2019), p. 432-461
ISSN: 0045-7825
DOI: 10.1016/j.cma.2019.02.024
Boddu V., Steinmann P.:
On the emergence of out-of-plane ferroelectricity in ultrathin films
In: Archive of Applied Mechanics 89 (2019), p. 1171-1181
ISSN: 0939-1533
DOI: 10.1007/s00419-019-01522-3
Oberleiter T., Müller A., Hausotte T., Willner K.:
SURROGATE MODELING CONSIDERING MEASURING DATA AND THEIR MEASUREMENT UNCERTAINTY
UNCECOMP 2019 - 3rd ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering (Crete, 24. June 2019 - 26. June 2019)
In: M. Papadrakakis, V. Papadopoulos, G. Stefanou (ed.): Uncecomp 2019 Proceedings 2019
Open Access: https://2019.uncecomp.org/proceedings/pdf/18786.pdf
URL: https://2019.uncecomp.org/proceedings/
Mehnert M., Steinmann P.:
On the influence of the compliant electrodes on the mechanical behavior of VHB 4905
In: Computational Materials Science 160 (2019), p. 287-294
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2019.01.011
Demirkan E., Artan R.:
Buckling Analysis of Nanobeams Based on Nonlocal Timoshenko Beam Model by the Method of Initial Values
In: International Journal of Structural Stability and Dynamics 19 (2019)
ISSN: 0219-4554
DOI: 10.1142/S0219455419500366
Landkammer P., Jobst A., Kiener C., Steinmann P., Merklein M.:
Investigations on residual stress generation in full-forward-extrusion
In: Production Engineering (2019)
ISSN: 0944-6524
DOI: 10.1007/s11740-019-00892-5
Heling B., Oberleiter T., Schleich B., Willner K., Wartzack S.:
On the Selection of Sensitivity Analysis Methods in the Context of Tolerance Management
In: Journal of Verification, Validation and Uncertainty Quantification 4 (2019), p. 011001:1-011001:10
ISSN: 2377-2158
DOI: 10.1115/1.4043912
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5d42c82b60dc1
Cai X., Steinmann P., Yao X., Wang J.:
Thermodynamic formulation of a unified multi-mechanism continuum viscoplastic damage model with application to high-Cr steels
In: International Journal of Plasticity 114 (2019), p. 15-39
ISSN: 0749-6419
DOI: 10.1016/j.ijplas.2018.09.011
Smriti ., Kumar A., Großmann A., Steinmann P.:
A thermoelastoplastic theory for special Cosserat rods
In: Mathematics and Mechanics of Solids 24 (2019), p. 686-700
ISSN: 1081-2865
DOI: 10.1177/1081286517754132
Diaz A., Davydov D., Chen Y.:
On the equivalence of the two foundational formulations for atomistic flux in inhomogeneous transport processes
In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 475 (2019), Article No.: 20180688
ISSN: 1364-5021
DOI: 10.1098/rspa.2018.0688
Brands B., Davydov D., Mergheim J., Steinmann P.:
Reduced-Order Modelling and Homogenisation in Magneto-Mechanics: A Numerical Comparison of Established Hyper-Reduction Methods
In: Mathematical and Computational Applications 24 (2019)
ISSN: 1300-686X
DOI: 10.3390/mca24010020
Cui Y., Ravnik J., Verhnjak O., Hribersek M., Steinmann P.:
A novel model for the lift force acting on a prolate spheroidal particle in arbitrary non-uniform flow. Part II. Lift force taking into account the non-streamwise flow shear
In: International Journal of Multiphase Flow 111 (2019), p. 232-240
ISSN: 0301-9322
DOI: 10.1016/j.ijmultiphaseflow.2018.12.003
Saeb S., Steinmann P., Javili A.:
On effective behavior of microstructures embedding general interfaces with damage
In: Computational Mechanics (2019)
ISSN: 0178-7675
DOI: 10.1007/s00466-019-01727-x
Heling B., Oberleiter T., Rohrmoser A., Kiener C., Schleich B., Hagenah H., Merklein M., Willner K., Wartzack S.:
Berücksichtigung von produktionsspezifischen Abweichungen im interdisziplinären Toleranzmanagement
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen, 5. February 2019 - 5. February 2019)
In: Wartzack (ed.): Industriekolloquium der Forschergruppe FOR 2271, Stamsried: 2019
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c6a7ad28207e
Pivovarov D., Willner K., Steinmann P., Brumme S., Müller M., Srisupattarawanit T., Ostermeyer GP., Henning C., Ricken T., Kastian S., Reese S., Moser D., Grasedyck L., Biehler J., Pfaller M., Wall W., Kohlsche T., Estorff Ov., Gruhlke R., Eigel M., Ehre M., Papaioannou I., Straub D., Leyendecker S.:
Challenges of order reduction techniques for problems involving polymorphic uncertainty
In: GAMM-Mitteilungen (2019), Article No.: e201900010
ISSN: 0936-7195
DOI: 10.1002/gamm.201900011
Sommerfeld M., Cui Y., Schmalfuß S.:
Potential and constraints for the application of CFD combined with Lagrangian particle tracking to dry powder inhalers
In: European Journal of Pharmaceutical Sciences 128 (2019), p. 299-324
ISSN: 0928-0987
DOI: 10.1016/j.ejps.2018.12.008
Budday S., Holzapfel GA., Steinmann P., Kuhl E.:
Challenges and perspectives in brain tissue testing and modeling
In: Proceedings in Applied Mathematics and Mechanics accepted (2019)
ISSN: 1617-7061
Saeb S., Steinmann P., Javili A.:
Designing tunable composites with general interfaces
In: International Journal of Solids and Structures (2019)
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2019.04.006
Motamarri P., Das S., Rudraraju S., Ghosh K., Davydov D., Gavini V.:
DFT-FE – A massively parallel adaptive finite-element code for large-scale density functional theory calculations
In: Computer Physics Communications (2019), Article No.: 106853
ISSN: 0010-4655
DOI: 10.1016/j.cpc.2019.07.016
Müller A., Heling B., Schleich B., Oberleiter T., Willner K., Wartzack S., Hausotte T.:
Methoden zur Reduzierung und Berücksichtigung der Unsicherheiten von dimensionellen Messgrößen in der Toleranzanalyse
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen, 5. February 2019 - 5. February 2019)
In: Wartzack (ed.): Industriekolloquium der Forschergruppe FOR 2271, Stamsried: 2019
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c6a7ab3612b6
Pivovarov D., Hahn V., Steinmann P., Willner K., Leyendecker S.:
Fuzzy dynamics of multibody systems with polymorphic uncertainty in the material microstructure
In: Computational Mechanics 64 (2019), p. 1601-1619
ISSN: 0178-7675
DOI: 10.1007/s00466-019-01737-9
Pivovarov D., Steinmann P., Willner K.:
Acceleration of the spectral stochastic FEM using POD and element based discrete empirical approximation for a micromechanical model of heterogeneous materials with random geometry
In: Computer Methods in Applied Mechanics and Engineering (2019), Article No.: 112689
ISSN: 0045-7825
DOI: 10.1016/j.cma.2019.112689
Landkammer P., Jobst A., Kiener C., Steinmann P., Merklein M.:
Mechanisms of residual stress generation in full-forward-extrusion
In: Production Engineering (2019)
ISSN: 0944-6524
Mcbride A., Davydov D., Steinmann P.:
Modelling the flexoelectric effect in solids
7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, 2. September 2019 - 4. September 2019)
In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
Nur C., Artan R.:
An investigation of free vibrations of a strain gradient Timoshenko beams with the method of initial values
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems (2019)
ISSN: 0946-7076
DOI: 10.1007/s00542-019-04626-6
Köpf J., Soldner D., Ramsperger M., Mergheim J., Markl M., Körner C.:
Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
In: Computational Materials Science 162 (2019), p. 148-155
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2019.03.004
Cui Y., Sommerfeld M.:
The modelling of carrier-wall collision with drug particle detachment for dry powder inhaler applications
In: Powder Technology 344 (2019), p. 741-755
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.12.067
Steinmann P., Mcbride A., Javili A.:
Novel vistas on the foundations of peridynamics
7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, 2. September 2019 - 4. September 2019)
In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
Firooz S., Saeb S., Chatzigeorgiou G., Meraghni F., Steinmann P., Javili A.:
Systematic study of homogenization and the utility of circular simplified representative volume element
In: Mathematics and Mechanics of Solids (2019)
ISSN: 1081-2865
DOI: 10.1177/1081286518823834
Arndt D., Bangerth W., Clevenger TC., Davydov D., Fehling M., Garcia-Sanchez D., Harper G., Heister T., Heltai L., Kronbichler M., Maguire Kynch R., Maier M., Pelteret JP., Turcksin B., Wells D.:
The deal.II Library, Version 9.1
In: Journal of Numerical Mathematics (2019)
ISSN: 1570-2820
DOI: 10.1515/jnma-2019-0064
Baloglu MV., Willner K.:
Constitutive modelling of sheet-layered lamination stacks
In: Proceedings in Applied Mathematics and Mechanics 18 (2018)
ISSN: 1617-7061
DOI: 10.1002/pamm.201800162
URL: https://onlinelibrary.wiley.com/doi/10.1002/pamm.201800162
Baloglu MV., Willner K.:
Influence of the Constitutive Contact Law on the Anisotropic Material Parameters of Sheet-Layered Lamination Stacks
2018 8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. December 2018 - 5. December 2018)
In: IEEE (ed.): 2018 8th International Electric Drives Production Conference (EDPC) 2018
DOI: 10.1109/EDPC.2018.8658276
URL: https://ieeexplore.ieee.org/document/8658276
Budday S., Sommer G., Paulsen F., Holzapfel GA., Steinmann P., Kuhl E.:
Region‐ and loading‐specific finite viscoelasticity of human brain tissue
In: Proceedings in Applied Mathematics and Mechanics 18 (2018), Article No.: e201800169
ISSN: 1617-7061
DOI: 10.1002/pamm.201800169
Caspari M., Landkammer P., Steinmann P.:
A non-invasive node-based form finding approach with discretization-independent target configuration
In: Advanced Modeling and Simulation in Engineering Sciences 5 (2018), Article No.: 11
ISSN: 2213-7467
DOI: 10.1186/s40323-018-0104-9
Weidauer T., Willner K.:
Numerical and experimental modal analysis of structures under gyroscopic inﬂuence in ALE formulation
ISMA2018 (Leuven, Belgien, 17. September 2018 - 19. September 2018)
Landkammer P., Caspari M., Steinmann P.:
Improvements on a non-invasive, parameter-free approach to inverse form finding
In: Computational Mechanics 61 (2018), p. 433-447
ISSN: 0178-7675
DOI: 10.1007/s00466-017-1468-2
Oberleiter T., Heling B., Schleich B., Willner K., Wartzack S.:
Fuzzy Sensitivity Analysis in the Context of Dimensional Management
In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering Volume 5 (2018), p. 011008-1 - 011008-7
ISSN: 2332-9025
DOI: 10.1115/1.4040919
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c1c9e401132d
Pivovarov D., Oberleiter T., Willner K., Steinmann P.:
Fuzzy-Stochastic FEM-based homogenization framework for materials with polymorphic uncertainties in the microstructure
In: International Journal for Numerical Methods in Engineering (2018)
ISSN: 0029-5981
DOI: 10.1002/nme.5947
Süß D., Jerschl M., Willner K.:
Calculating the Dynamic Response of Jointed Structures in the Frequency Domain Using Contact Interface Elements
In: Matthew R.W. Brake (ed.): The Mechanics of Jointed Structures, Cham: Springer, 2018, p. 491-510
ISBN: 978-3-319-56818-8
DOI: 10.1007/978-3-319-56818-8_27
Cui Y., Ravnik J., Hribersek M., Steinmann P.:
A novel model for the lift force acting on a prolate spheroidal particle in an arbitrary non-uniform flow. Part I. Lift force due to the streamwise flow shear
In: International Journal of Multiphase Flow 104 (2018), p. 103-112
ISSN: 0301-9322
DOI: 10.1016/j.ijmultiphaseflow.2018.03.007
Seeger B., Butaud P., Baloglu MV., Du F., Brake M., Schwingshackl C.:
In Situ Measurements of Interfacial Contact Pressure During Impact Hammer Tests
IMAC 2018 (Orlando, FL, 12. February 2018 - 15. February 2018)
In: Gaetan Kerschen (ed.): Nonlinear Dynamics, Volume 1; Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 2018
DOI: 10.1007/978-3-319-74280-9_24
URL: https://link.springer.com/chapter/10.1007/978-3-319-74280-9_24
Löffler M., Engel U., Willner K., Beyer F., Merklein M.:
Investigation of the tribological behaviour of microstructures for controlling the material flow in sheet-bulk metal forming
In: CIRP Journal of Manufacturing Science and Technology (2018)
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2018.05.002
URL: https://www.sciencedirect.com/science/article/pii/S1755581718300294?via=ihub
Caspari M., Landkammer P., Steinmann P.:
Illustration of an improved non-invasive form finding algorithm
ESAFORM 2018 (Palermo, 23. April 2018 - 25. April 2018)
In: American Institute of Physics Inc. (ed.): 21st International ESAFORM Conference on Material Forming 2018
DOI: 10.1063/1.5034960
Oberleiter T., Willner K.:
Fuzinsumo ‐ Fuzzy investigation with surrogate models
88th GAMM Annual Meeting (Ilmenau/Weimar, 6. March 2017 - 10. March 2017)
In: PAMM, Volume 17, Weinheim: 2018
DOI: 10.1002/pamm.201710331
Härtel M., Pfeiffer S., Schmaltz S., Söhngen B., Kulawinski D., Willner K., Henkel S., Biermann H., Wagner MF.:
On the identification of an effective cross section for a cruciform specimen
In: Strain 54 (2018)
ISSN: 1475-1305
DOI: 10.1111/str.12257
Budday S.:
The Role of Mechanics during Brain Development (Dissertation, 2018)
URL: https://opus4.kobv.de/opus4-fau/frontdoor/index/index/year/2018/docId/9298
Kergaßner A., Mergheim J., Steinmann P.:
Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718
In: Proceedings in Applied Mathematics and Mechanics (2018)
ISSN: 1617-7061
DOI: 10.1002/pamm.201800389
Weidauer T., Willner K.:
Model reduction of gyroscopic systems in ALE formulation with and without non-linearities
GAMM 2018 (München, 19. March 2018 - 23. March 2018)
In: PAMM, Volume 18, Weinheim: 2018
Mehnert M., Mathieu-Pennober T., Steinmann P.:
On the Influence of the Coupled Invariant in Thermo-Electro-Elasticity
In: Generalized Models and Non-classical Approaches in Complex Materials, 2018, p. 533-554
Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
iCAT 2018 (Maribor, 10. October 2018 - 11. October 2018)
In: Proceedings of 7th International Conference on Additive Technologies 2018
Cui Y., Sommerfeld M.:
Application of Lattice-Boltzmann Method for Analysing Detachment of Micron-Sized Particles from Carrier Particles in Turbulent Flows
In: Flow Turbulence and Combustion 100 (2018), p. 271-297
ISSN: 1386-6184
DOI: 10.1007/s10494-017-9835-9
Willner K.:
Identification of contact parameters for dry friction joints
International Conference on Noise and Vibration Engineering (ISMA) / International Conference on Uncertainty in Structural Dynamics (USD) (Leuven, 17. September 2018 - 19. September 2018)
In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018), HEVERLEE: 2018
Koullapis P., Kassinos S., Muela J., Perez-Segarra C., Rigola J., Lehmkuhl O., Cui Y., Sommerfeld M., Elcner J., Jicha M., Saveljic I., Filipovic N., Lizal F., Nicolaou L.:
Regional aerosol deposition in the human airways: The SimInhale benchmark case and a critical assessment of in silico methods
In: European Journal of Pharmaceutical Sciences 113 (2018), p. 77-94
ISSN: 0928-0987
DOI: 10.1016/j.ejps.2017.09.003
Redel M., Walter B., Kaschta J., Steinmann P., Schubert DW.:
Resonance phenomena in oscillatory shear rheometry: Influence of material parameters
Nordic Polymer Days 2018 (Kopenhagen, 28. May 2018 - 30. May 2018)
Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13. December 2018 - 13. December 2018)
Andres S., Steinmann P., Budday S.:
The origin of compression influences geometric instabilities in bilayers
In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2018)
ISSN: 1364-5021
DOI: 10.1098/rspa.2018.0267
Holland M., Goriely A., Budday S., Kuhl E.:
Symmetry Breaking in Wrinkling Patterns: Gyri Are Universally Thicker than Sulci
In: Physical Review Letters 121 (2018), Article No.: 228002
ISSN: 0031-9007
DOI: 10.1103/PhysRevLett.121.228002
Cui Y., Ravnik J., Hribersek M., Steinmann P.:
On constitutive models for the momentum transfer to particles in fluid-dominated two-phase flows
Springer Verlag, 2018
(Advanced Structured Materials, Vol.80)
DOI: 10.1007/978-3-319-70563-7_1
Mehnert M., Mokarram H., Steinmann P.:
Numerical modelling of thermo-electro-viscoelasticity with field-dependent material parameters
In: International Journal of Non-Linear Mechanics 106 (2018), p. 13-24
ISSN: 0020-7462
Weidauer T., Willner K.:
Reduced Order Modelling for Non-Linear Rotating Systems in ALE Formulation with Contact
IMAC 2018 (Orlando, FL, USA, 12. February 2018 - 15. February 2018)
In: Gaetan Kerschen (ed.): Nonlinear Dynamics, Volume 1; Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 2018
DOI: 10.1007/978-3-319-74280-9_31
Kergaßner A., Mergheim J., Steinmann P.:
Modeling of additively manufactured materials using gradient-enhanced crystal plasticity
In: Computers & Mathematics with Applications (2018)
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.05.016
Duong MT., Wenger T., Herrnböck L., Ach T., Holz D., Kreipp A., Binnewitt SV., Stegmann H., Dittrich S., Alkassar M., Leyendecker S.:
Modelling cardiac mechanics and electrophysiology of a rat left ventricle: A case study.
International Conference on Biomedical Technology (Hannover, 6. November 2017 - 8. November 2017)
Esmaeili A., Steinmann P., Javili A.:
Surface plasticity: theory and computation
In: Computational Mechanics (2017)
ISSN: 0178-7675
DOI: 10.1007/s00466-017-1517-x
URL: https://link.springer.com/article/10.1007/s00466-017-1517-x?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst#citeas
Mehnert M., Pelteret JP., Steinmann P.:
Numerical modelling of nonlinear thermo-electro-elasticity
In: Mathematics and Mechanics of Solids (2017)
ISSN: 1081-2865
DOI: 10.1177/1081286517729867
Landkammer P., Söhngen B., Steinmann P., Willner K.:
On gradient-based optimization strategies for inverse problems in metal forming
In: GAMM-Mitteilungen 40 (2017), p. 27-50
ISSN: 0936-7195
DOI: 10.1002/gamm.201710004
Söhngen B., Willner K.:
Identification of nonlinear kinematic hardening parameters for sheet metal from biaxial loading tests
XIV International Conference on Computational Plasticity (COMPLAS 2017) (Barcelona, 5. September 2017 - 7. September 2017)
In: Oñate E., Owen D.R.J. , Peric D. , Chiumenti M. (ed.): XIV International Conference on Computational Plasticity. Fundamentals and Applications 2017
Mehnert M., Mokarram H., Steinmann P.:
Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers
In: International Journal of Solids and Structures (2017)
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2017.08.022
Budday S., Sommer G., Holzapfel GA., Steinmann P., Kuhl E.:
Viscoelastic parameter identification of human brain tissue
In: Journal of the Mechanical Behavior of Biomedical Materials 74 (2017), p. 463-476
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2017.07.014
Soldner D., Brands B., Zabihyan R., Steinmann P., Mergheim J.:
A numerical study of different projection-based model reduction techniques applied to computational homogenisation
In: Computational Mechanics (2017)
ISSN: 0178-7675
DOI: 10.1007/s00466-017-1428-x
Budday S., Sommer G., Haybaeck J., Steinmann P., Holzapfel GA., Kuhl E.:
Rheological characterization of human brain tissue
In: Acta Biomaterialia (2017)
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2017.06.024
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: II. Influence of experimental conditions
In: Polymer Testing 61 (2017), p. 455-463
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.05.036
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: I. Detecting wall slip
In: Polymer Testing (2017)
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.05.035
Mihai LA., Budday S., Holzapfel GA., Kuhl E., Goriely A.:
A family of hyperelastic models for human brain tissue
In: Journal of the Mechanics and Physics of Solids 106 (2017), p. 60-79
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2017.05.015
Boddu V., Endres F., Steinmann P.:
Molecular dynamics study of ferroelectric domain nucleation and domain switching dynamics
In: Scientific Reports (2017)
ISSN: 2045-2322
DOI: 10.1038/s41598-017-01002-0
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
Preparation of magnetorheological elastomers and their slip-free characterization by means of parallel-plate rotational rheometry
In: Smart Materials and Structures 26 (2017), Article No.: 085004
ISSN: 1361-665X
DOI: 10.1088/1361-665X/aa6b63
URL: http://iopscience.iop.org/article/10.1088/1361-665X/aa6b63
Budday S., Andres S., Walter B., Steinmann P., Kuhl E.:
Wrinkling instabilities in soft bi-layered systems
In: Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 375 (2017)
ISSN: 1364-503X
DOI: 10.1098/rsta.2016.0163
Pelteret JP.:
The deal.II code gallery: Quasi-static Finite-Strain Quasi-incompressible Visco-elasticity
(2017)
DOI: 10.5281/zenodo.437604
URL: https://dealii.org/developer/doxygen/deal.II/code_gallery_Quasi_static_Finite_strain_Quasi_incompressible_ViscoElasticity.html
(online publication)
Riedlbauer DR., Scharowsky T., Singer R., Steinmann P., Körner C., Mergheim J.:
Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
In: International Journal of Advanced Manufacturing Technology (2017)
ISSN: 0268-3768
DOI: 10.1007/s00170-016-8819-6
URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
Baloglu MV., Willner K.:
Determination of material parameters for a sheet‐layered lamination stack
In: Proceedings in Applied Mathematics and Mechanics 17 (2017), p. 393-394
ISSN: 1617-7061
DOI: 10.1002/pamm.201710166
URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.201710166
Saeb S., Steinmann P., Javili A.:
Bounds on size-dependent behavior of composites
In: Philosophical Magazine 17 (2017), p. 1-27
ISSN: 1478-6435
DOI: 10.1080/14786435.2017.1408967
Riehl S., Steinmann P.:
On structural shape optimization using an embedding domain discretization technique
In: International Journal for Numerical Methods in Engineering 109 (2017), p. 1315 - 1343
ISSN: 0029-5981
DOI: 10.1002/nme.5326
Buerhop C., Wirsching S., Bemm A., Pickel T., Hohmann P., Nieß M., Vodermayer C., Huber A., Glück B., Mergheim J., Camus C., Hauch J., Brabec C.:
Evolution of cell cracks in PV-modules under field and laboratory conditions
In: Progress in Photovoltaics (2017)
ISSN: 1062-7995
DOI: 10.1002/pip.2975
Weickenmeier J., de Rooij R., Budday S., Ovaert T., Kuhl E.:
The mechanical importance of myelination in the central nervous system
In: Journal of the Mechanical Behavior of Biomedical Materials (2017)
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2017.04.017
Arndt D., Bangerth W., Davydov D., Heister T., Heltai L., Kronbichler M., Maier M., Pelteret JP., Turcksin B., Wells D.:
The \texttt{deal.II} Library, Version 8.5
In: Journal of Numerical Mathematics 25 (2017), p. 137--145
ISSN: 1570-2820
DOI: 10.1515/jnma-2017-0058
Budday S., Steinmann P.:
On the influence of inhomogeneous stiffness and growth on mechanical instabilities in the developing brain
In: International Journal of Solids and Structures (2017)
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2017.08.010
Caspari M., Landkammer P., Steinmann P.:
Inverse form finding with H-adaptivity and an application to a notch stamping process
COMPLAS 2017 (Barcelona, 5. September 2017 - 7. September 2018)
In: International Center for Numerical Methods in Engineering (ed.): Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications 2017
URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045301572∂nerID=40&md5=538752db49a36adbf24b6bb7f9ec5e0b
Buerhop C., Wirsching S., Gehre S., Pickel T., Winkler T., Bemm A., Mergheim J., Camus C., Hauch J., Brabec C.:
Lifetime and Degradation of Pre-damaged PV-Modules - Field study and lab testing
44th Photovoltaic Specialist Conference (PVSC) (Washington, DC, 25. June 2017 - 30. June 2017)
In: IEEE (ed.): Conference record of the IEEE Photovoltaic Specialists Conference 2017
Buerhop C., Wirsching S., Gehre S., Pickel T., Winkler T., Bemm A., Mergheim J., Camus C., Hauch J., Brabec C.:
Lifetime and Degradation of Pre-damaged PV-Modules – Field study and lab testing
44th IEEE Photovoltaic Specialists Conference (Washington D.C., 25. June 2017 - 30. June 2017)
Nowak A., Willner K., Campanile LF., Hasse A.:
Active Vibration Control of Excited Structures by means of Shape Adaption
International Conference on Adaptive Structures and Technologies (Krakau, 8. October 2017 - 11. October 2017)
Budday S., Sommer G., Birkl C., Langkammer C., Haybaeck J., Kohnert J., Bauer M., Paulsen F., Steinmann P., Kuhl E., Holzapfel GA.:
Mechanical characterization of human brain tissue
In: Acta Biomaterialia 48 (2017), p. 319–340
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2016.10.036
Boddu V., Endres F., Steinmann P.:
Non-linear switching kinetics of ferroelectric mono-domain single crystals
8th ECCOMAS Thematic Conference on Smart Structures and the 6th International Conference on Smart Materials and Nanotechnology in Engineering (Madrid, 5. June 2017 - 8. June 2017)
URL: http://congress.cimne.com/smart2017/admin/files/fileabstract/a41.pdf
Jerschl M., Willner K.:
Design of a frequency-energy independent nonlinear oscillator
35th IMAC Conference and Exposition on Structural Dynamics, 2017
DOI: 10.1007/978-3-319-54404-5_21
Heling B., Oberleiter T., Schleich B., Willner K., Wartzack S.:
Comparison of Different Sensitivity Analysis Methods in the Context of Dimensional Management
ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa, Florida, USA, 3. November 2017 - 9. November 2017)
In: ASME (ed.): ASME 2017 International Mechanical Engineering Congress and Exposition, Volume 2: Advanced Manufacturing 2017
DOI: 10.1115/IMECE2017-70550
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c37456fa5d56
Esmaeili A., Steinmann P., Javili A.:
COUPLED THERMALLY GENERAL IMPERFECT AND MECHANICALLY COHERENT ENERGETIC INTERFACES SUBJECT TO IN-PLANE DEGRADATION
In: Journal of Mechanics of Materials and Structures (2017)
ISSN: 1559-3959
Open Access: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
URL: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
Javili A., Steinmann P., Mosler J.:
Micro-to-macro transition accounting for general imperfect interfaces
In: Computer Methods in Applied Mechanics and Engineering 317 (2017), p. 274-317
ISSN: 0045-7825
DOI: 10.1016/j.cma.2016.12.025
Davydov D., Gerasimov T., Pelteret JP., Steinmann P.:
Convergence study of the h-adaptive PUM and the hp-adaptive FEM applied to eigenvalue problems in quantum mechanics
In: Advanced Modeling and Simulation in Engineering Sciences 4 (2017), p. 7
ISSN: 2213-7467
DOI: 10.1186/s40323-017-0093-0
Liu S., Pfaller S., Rahimi M., Possart G., Steinmann P., Böhm MC., Müller-Plathe F.:
Uniaxial deformation of polystyrene–silica nanocomposites studied by hybrid molecular dynamics–finite element simulations
In: Computational Materials Science 129 (2016), p. 1-12
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2016.11.031
Schindler S., Steinmann P., Aurich JC., Zimmermann M.:
A thermo-viscoplastic constitutive law for isotropic hardening of metals
In: Archive of Applied Mechanics 2017 (2016), p. 129-157
ISSN: 0939-1533
DOI: 10.1007/s00419-016-1181-1
Pivovarov D., Steinmann P.:
On stochastic FEM based computational homogenization of magneto-active heterogeneous materials with random microstructure
In: Computational Mechanics 58 (2016), p. 981-1002
ISSN: 0178-7675
DOI: 10.1007/s00466-016-1329-4
Brands B., Mergheim J., Steinmann P.:
Reduced-order modelling for linear heat conduction with parametrised moving heat sources
In: GAMM-Mitteilungen 39 (2016), p. 170-188
ISSN: 0936-7195
DOI: 10.1002/gamm.201610011
Baloglu MV., Willner K.:
Numerical homogenization and simulation of a lamination stack
Electric Drives Production Conference (EDPC), 2016 6th International (Nürnberg, 30. November 2016 - 1. December 2016)
In: IEEE (ed.): 2016 6th International Electric Drives Production Conference (EDPC) 2016
DOI: 10.1109/EDPC.2016.7851316
URL: http://ieeexplore.ieee.org/document/7851316/
Sitzmann S., Willner K., Wohlmuth BI.:
Variationally consistent quadratic finite element contact formulations for finite deformation contact problems on rough surfaces
In: Finite Elements in Analysis and Design 109 (2016), p. 37-53
ISSN: 0168-874X
DOI: 10.1016/j.finel.2015.09.009
Weidauer T., Willner K.:
Eigenpath analysis of rotating mechanical systems based on ALE formulation
Joint Annual Meeting of DMV and GAMM (Braunschweig, 7. March 2016 - 11. March 2016)
In: PAMM, Volume 16, Issue 1, Weinheim: 2016
DOI: 10.1002/pamm.201610113
URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201610113/abstract
Kergaßner A., Mergheim J., Steinmann P.:
Modelling additive manufactured materials using a crystal plasticity model
In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 355-356
ISSN: 1617-7061
DOI: 10.1002/pamm.201610166
Soldner D., Brands B., Zabihyan R., Steinmann P., Mergheim J.:
Computational Homogenisation using Reduced-Order Modelling applied to Hyperelasticity
In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 551-552
ISSN: 1617-7061
DOI: 10.1002/pamm.201610264
Landkammer P., Steinmann P.:
Case study on the influence of kinematic hardening within a parameter-free and non-invasive form finding approach
Int. Conf. on Numerical Methods in Industrial Forming Processes (Troyes, 4. July 2016 - 6. July 2016)
In: MATEC Web of Conferences 2016
DOI: 10.1051/matecconf/20168011007
Glaas D., Leyendecker S.:
Optimal feedback control for constrained mechanical systems
GAMM Annual Meeting (Braunschweig, 7. March 2016 - 11. March 2016)
In: Proc. Appl. Math. Mech. (PAMM) 2016
DOI: 10.1002/pamm.201610016
Zabihyan R., Mergheim J., Javili A., Steinmann P.:
Computational Homogenization in Magneto-Mechanical Composites
In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 501-502
ISSN: 1617-7061
DOI: 10.1002/pamm.201610239
Schmitt O., Steinmann P.:
On curvature approximation in 2D and 3D parameter-free shape optimization
In: Structural and Multidisciplinary Optimization (2016)
ISSN: 1615-147X
DOI: 10.1007/s00158-016-1595-y
Baloglu MV., Willner K.:
Material modelling of a sheet-layered lamination stack by homogenization
In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 509 - 510
ISSN: 1617-7061
DOI: 10.1002/pamm.201610243
URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201610243/epdf
Beyer F., Willner K.:
A constitutive friction law for sheet-bulk metal forming
In: Journal of Japanese Society of Tribologists 11 (2016), p. 614-622
ISSN: 0915-1168
DOI: 10.2474/trol.11.614
Weickenmeier J., de Rooij R., Budday S., Steinmann P., Ovaert T., Kuhl E.:
Brain stiffness increases with myelin content
In: Acta Biomaterialia (2016), p. 265–272
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2016.07.040
Beyer F., Löffler M., Willner K., Engel U., Merklein M.:
Enhancement of a Constitutive Friction Law by Considering Plastic Smoothing of Rough Surfaces in Dependency on the Bulk Stresses
In: Tribology in Industry 38 (2016), p. 163-175
ISSN: 0354-8996
Open Access: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf
URL: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf
Mehnert M., Mokarram H., Steinmann P.:
On nonlinear thermo-electro-elasticity
In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2016)
ISSN: 1364-5021
Wilhelm P., Steinmann P., Rudolph J.:
Effects of Boiling Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
In: Journal of Pressure Vessel Technology-Transactions of the Asme 138 (2016), p. 031406-1 - 031406-6
ISSN: 0094-9930
DOI: 10.1115/1.4032651
Pfaller S., Possart G., Steinmann P., Rahimi M., Müller-Plathe F., Böhm MC.:
Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics-finite-element simulation framework
In: Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 93 (2016), Article No.: 052505
ISSN: 1550-2376
DOI: 10.1103/PhysRevE.93.052505
Küstner C., Beyer F., Kumor D., Loderer A., Wartzack S., Willner K., Blum H., Rademacher A., Hausotte T.:
Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming
DESIGN 2016 14th International Design Conference (Dubrovnik, 16. May 2016 - 19. May 2016)
In: Marjanovic, D.; Storga, M.; Pavkovic, N.; Bojcetic, N.; Skec, S. (ed.): DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, Glasgow: 2016
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5742b0e022d9f
Landkammer P., Schneider T., Schulte R., Steinmann P., Merklein M.:
A non-invasive form finding approach with application to metal forming
In: Production Engineering 10 (2016), p. 93-102
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0659-6
Landkammer P., Steinmann P.:
A non-invasive heuristic approach to shape optimization in forming
In: Computational Mechanics accepted (2016), p. 169-191
ISSN: 0178-7675
DOI: 10.1007/s00466-015-1226-2
Kersting P., Gröbel D., Merklein M., Peter S., Wernicke S., Tekkaya AE., Krebs E., Freiburg D., Biermann D., Weikert T., Tremmel S., Stangier D., Tillmann W., Matthias S., Reithmeier E., Löffler M., Beyer F., Willner K.:
Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming
In: Production Engineering 10 (2016), p. 37-50
ISSN: 0944-6524
DOI: 10.1007/s11740-015-0651-6
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5695fddc4e358
Pelteret JP., McBride A.:
The deal.II code gallery: Quasi-Static Finite-Strain Compressible Elasticity
(2016)
DOI: 10.5281/zenodo.437601
URL: https://dealii.org/developer/doxygen/deal.II/code_gallery_Quasi_static_Finite_strain_Compressible_Elasticity.html
(online publication)
Rudolph J., Wilhelm P., Roth A., Herbst M., Kammerer M., Schuler X., Herter KH.:
Proposal for an Improved Engineering Fatigue Lifetime Assessment Concept
Pressure Vessels and Piping Conference (Vancouver, 17. July 2016 - 21. July 2016)
In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2016 Pressure Vessels & Piping Conference 2016
Jerschl M., Süß D., Willner K., Jerschl M.:
Studies of a geometrical nonlinear friction damped system using NNMs
34th IMAC, A Conference and Exposition on Structural Dynamics, 2016
DOI: 10.1007/978-3-319-29763-7_33
Wilhelm P., Steinmann P., Rudolph J.:
The Effect of Heat Treatments at Different Plastic States on the Isotropic Hardening Behavior of Austenitic Stainless Steel
Annual Meeting on Nuclear Technology (Hamburg, 10. May 2016 - 12. May 2016)
In: Compacts of the 47th AMNT 2016
Esmaeili A., Javili A., Steinmann P.:
Highly-conductive energetic coherent interfaces subject to in-plane degradation
In: Mathematics and Mechanics of Solids (2016)
ISSN: 1081-2865
DOI: 10.1177/1081286516642818
URL: http://journals.sagepub.com/doi/abs/10.1177/1081286516642818
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magnetorheological (MR) elastomers
17th International Congress on Rheology (Kyoto, 8. August 2016 - 13. August 2016)
Pivovarov D., Steinmann P.:
Modified SFEM for computational homogenization of heterogeneous materials with microstructural geometric uncertainties
In: Computational Mechanics 57 (2016), p. 123-147
ISSN: 0178-7675
DOI: 10.1007/s00466-015-1224-4
Bangerth W., Davydov D., Heister T., Heltai L., Kanschat G., Kronbichler M., Maier M., Turcksin B., Wells D.:
The \texttt{deal.II} Library, Version 8.4
In: Journal of Numerical Mathematics 24 (2016), p. 135-141
ISSN: 1570-2820
DOI: 10.1515/jnma-2016-1045
Pfaller S., Possart G., Steinmann P., Rahimi M., Mueller-Plathe F., Boehm MC.:
Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics--finite-element simulation framework // Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics-finite-element simulation framework
In: Physical Review E 93 (2016), Article No.: 052505
ISSN: 1539-3755
DOI: 10.1103/PhysRevE.93.052505
Käßmair S., Steinmann P.:
Comparative computational analysis of the Cahn--Hilliard equation with emphasis on C1-continuous methods
In: Journal of Computational Physics 322 (2016), p. 783-803
ISSN: 0021-9991
DOI: 10.1016/j.jcp.2016.07.005
Süß D., Jerschl M., Willner K.:
Adaptive harmonic balance analysis of dry friction damped systems
34th IMAC, A Conference and Exposition on Structural Dynamics, 2016
DOI: 10.1007/978-3-319-29739-2_36
Walter B., Kaschta J.:
Kriech- und Kriecherholungsmessungen zur Charakterisierung von Materialien mit langer charakteristischer Zeit
Geesthachter Polymertage: Rheologie von Polymeren für Forschung und Anwendung (Geesthacht, 8. November 2016 - 9. November 2016)
Esmaeili A., Javili A., Steinmann P.:
Coherent energetic interfaces accounting for in-plane degradation
In: International Journal of Fracture (2016)
ISSN: 0376-9429
URL: https://link.springer.com/article/10.1007%2Fs10704-016-0160-4
Pelteret JP., Davydov D., McBride A., Vu DK., Steinmann P.:
Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space
In: International Journal for Numerical Methods in Engineering 108 (2016), p. 1307--1342
ISSN: 0029-5981
DOI: 10.1002/nme.5254
Weber J., Regensburger C., Tautz M., Becker S., Hüppe A., Kaltenbacher M.:
Computational aeroacoustic simulations of small vertical axis wind turbine
45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016 (Hamburg, 21. August 2016 - 24. August 2016)
URL: http://pub.dega-akustik.de/IN2016/data/articles/000582.pdf
Kergaßner A., Mergheim J., Steinmann P.:
Mesoscopic modelling of additively manufactured Inconel 718
5th International Conference on Additive Technologies - iCAT2016 (Nürnberg)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings 6th International Conference on Additive Technologies - iCAT2016, Ljubljana: 2016
Esmaeili A., Javili A., Steinmann P.:
Non-coherent energetic interfaces accounting for degradation
In: Computational Mechanics (2016)
ISSN: 0178-7675
URL: https://link.springer.com/article/10.1007%2Fs00466-016-1342-7
Saeb S., Steinmann P., Javili A.:
Aspects of Computational Homogenization at Finite Deformations: A Unifying Review From Reuss' to Voigt's Bound
In: Applied Mechanics Reviews 68 (2016), Article No.: 050801
ISSN: 0003-6900
DOI: 10.1115/1.4034024
Schindler S., Mergheim J., Zimmermann M., Aurich JC., Steinmann P.:
Numerical homogenization of elastic and thermal material properties for metal matrix composites (MMC)
In: Continuum Mechanics and Thermodynamics (2016)
ISSN: 0935-1175
DOI: 10.1007/s00161-016-0515-0
Endres F., Steinmann P.:
Size effects of 109? domain walls in rhombohedral barium titanate single crystals--A molecular statics analysis
In: Journal of Applied Physics 119 (2016)
ISSN: 0021-8979
DOI: 10.1063/1.4939600
Beese S., Beyer F., Blum H., Isik K., Kumor D., Löhnert S., Rademacher A., Tekkaya AE., Willner K., Wriggers P., Zeller S.:
Simulation of Sheet-Bulk Metal Forming Processes with Simufact.forming using User-Subroutines
19th ESAFORM Conference (Nantes, 27. April 2016 - 29. April 2016)
Lindlein N., Merklein B., Aiello A.:
Self-healing of Bessel beams
117 (2016)
(Conference report)
Schmitt O., Friederich J., Riehl S., Steinmann P.:
On the formulation and implementation of geometric and manufacturing constraints in node-based shape optimization
In: Structural and Multidisciplinary Optimization 53 (2016), p. 881 - 892
ISSN: 1615-147X
DOI: 10.1007/s00158-015-1359-0
Esmaeili A., Javili A., Steinmann P.:
A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces
In: International Journal of Solids and Structures (2016)
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2016.04.035
URL: http://www.sciencedirect.com/science/article/pii/S0020768316300592
Javili A., Saeb S., Steinmann P.:
Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions
In: Computational Mechanics (2016), p. 1-15
ISSN: 0178-7675
DOI: 10.1007/s00466-016-1333-8
Soldner D., Steinmann P., Mergheim J.:
Reducing computational cost of the simulation of selective laser melting of PA12
6th International Conference on Additive Technologies - iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer und Michael Schmidt (ed.): Proceedings of the 6th International Conference on Additive Technologies, Ljubljana: 2016
Beyer F., Hauer F., Willner K.:
Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces
In: Tribology in Industry 37 (2015), p. 400-412
ISSN: 0354-8996
Open Access: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf
URL: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf
Wilhelm P., Steinmann P., Rudolph J.:
Effects of Pressurized Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
In: Journal of Pressure Vessel Technology-Transactions of the Asme 137 (2015), p. 061404-1 - 061404-7
ISSN: 0094-9930
DOI: 10.1115/1.4029832
Will S., Bräuer A., Hankel R., Mehnert M., Schuster J.:
A Raman technique applicable for the analysis of the working principle of promoters and inhibitors of gas hydrate formation
In: Journal of Raman Spectroscopy 46 (2015), p. 1145-1149
ISSN: 0377-0486
DOI: 10.1002/jrs.4744
Beyer F., Willner K.:
Determination of a Constitutive Friction Law Using an Elastic-Plastic Half-Space Model
In: Proceedings in Applied Mathematics and Mechanics (2015), p. 173-174
ISSN: 1617-7061
DOI: 10.1002/pamm.201510077
URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201510077/pdf
Schmitt O., Steinmann P.:
On curvature control in node-based shape optimization
GAMM 2015 (Lecce, Italy, 23. March 2015 - 27. March 2015)
In: PAMM, Lecce, Italy: 2015
DOI: 10.1002/pamm.201510279
Landkammer P., Steinmann P.:
A global damping factor for a non-invasive form finding algorithm
86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
In: GAMM (ed.): Proc. Appl. Math. Mech., Weinheim: 2015
DOI: 10.1002/pamm.201510154
Mokarram H., Steinmann P.:
Towards modelling the curing process in particle-filled electro-active polymers
86th GAMM Annual Meeting (Lecce, Italy)
In: GAMM (ed.): PAMM, Lecce, Italy: 2015
DOI: 10.1002/pamm.201510141
Steinmann P., Endres F.:
On molecular statics simulations of ferroelectric functional materials
86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
In: GAMM (ed.): Proceedings in Applied Mathematics and Mechanics, Weinheim: 2015
DOI: 10.1002/pamm.201510005
Söhngen B., Willner K.:
Inverse Parameter Identification for Orthotropic Elasto-Plastic Sheet-Steel
In: Proceedings in Applied Mathematics and Mechanics 15 (2015), p. 361–362
ISSN: 1617-7061
DOI: 10.1002/pamm.201510171
Endres F., Steinmann P.:
An atomistic scale analysis of ferroelectric nanodomain interfaces
86th GAMM Annual Meeting (Lecce, Italy)
In: GAMM (ed.): Proceedings in Applied Mathematics and Mechanics, Weiheim: 2015
DOI: 10.1002/pamm.201510134
Klein D., Malezki W., Wartzack S.:
Introduction of a computational approach for the design of composite structures at the early embodiment design stage
20th International Conference on Engineering Design (ICED15) (Mailand, 27. July 2015 - 30. July 2015)
In: Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 4: Design for X, 27.-30. Juli 2015, Mailand, 2015, S. 11-20. 2015
Budday S., Steinmann P., Goriely A., Kuhl E.:
Size and curvature regulate pattern selection in the mammalian brain
In: Extreme Mechanics Letters 4 (2015), p. 193-198
ISSN: 2352-4316
DOI: 10.1016/j.eml.2015.07.004
Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning
In: Production Engineering 9 (2015), p. 473-485
ISSN: 0944-6524
DOI: 10.1007/s11740-015-0629-4
Aurich JC., Zimmermann M., Schindler S., Steinmann P.:
Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites
In: International Journal of Advanced Manufacturing Technology - (2015), p. 1-18
ISSN: 0268-3768
DOI: 10.1007/s00170-015-7444-0
Mokarram H., Chatzigeorgiou G., Meraghni F., Steinmann P.:
A multi-scale approach to model the curing process in magneto-sensitive polymeric materials
In: International Journal of Solids and Structures 69-70 (2015), p. 34-44
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2015.06.011
Pfaller S., Steinmann P.:
The Capriccio Method: An Arlequin‐Based Approach to Couple Molecular Dynamics and Finite Element Simulations of Polymers
GDR Polynano 3661 - Scientific Workshop on multiscale modeling, experimental characterization and simulations of nanocomposites (Université Paris‐Est Marne‐la‐Vallée, 15. June 2015 - 15. June 2015)
Pfaller S.:
Multiscale Simulation of Polymers - Coupling of Continuum Mechanics and Particle-Based Modelling (Dissertation, 2015)
Mokarram H., Amin A., Nomani Kabir M.:
Eight-chain and full-network models and their modified versions for rubber hyperelasticity : A comparative study
In: Journal of the Mechanical Behavior of Materials 24 (2015), p. 11-24
ISSN: 0334-8938
DOI: 10.1515/jmbm-2015-0002
Mokarram H., Saxena P., Steinmann P.:
Modelling the curing process in magneto-sensitive polymers: Rate-dependence and shrinkage
In: International Journal of Non-Linear Mechanics 74 (2015), p. 108-121
ISSN: 0020-7462
DOI: 10.1016/j.ijnonlinmec.2015.04.008
Loderer A., Hausotte T., Steinmann P., Merklein M., Landkammer P., Hildenbrand P., Schneider T.:
Development of a feature adapted measurement evaluation strategy
MacroScale 2014 - Recent developments in traceable dimensional measurements (Wien, 28. October 2014 - 30. October 2014)
DOI: 10.7795/810.20150325P
Wilhelm P., Steinmann P., Rudolph J.:
Fatigue Approach for Addressing Environmental Effects in Fatigue Usage Calculation
In: Atw-International Journal For Nuclear Power 60 (2015), p. 245 - 250
ISSN: 1431-5254
Budday S., Steinmann P., Kuhl E.:
Secondary instabilities modulate cortical complexity in the mammalian brain
In: Philosophical Magazine 95 (2015), p. 3244–3256
ISSN: 1478-6435
DOI: 10.1080/14786435.2015.1024184
Budday S., Nay R., de Rooij R., Steinmann P., Wyrobek T., Ovaert T., Kuhl E.:
Mechanical properties of gray and white matter brain tissue by indentation
In: Journal of the Mechanical Behavior of Biomedical Materials (2015), p. 318-330
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2015.02.024
Landkammer P., Loderer A., Krebs E., Söhngen B., Steinmann P., Hausotte T., Kersting P., Willner K., Biermann D.:
Experimental verification of a benchmark forming simulation
In: Key Engineering Materials 639 (2015), p. 251-258
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.251
Beyer F., Blum H., Kumor D., Rademacher A., Willner K., Schneider T.:
Experimental and Simulative Investigations of Tribology in Sheet-Bulk Metal Forming
In: Key Engineering Materials 639 (2015), p. 283-290
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.283
URL: http://www.scientific.net/KEM.639.283
Endres F., Steinmann P.:
Molecular statics simulations of ferroelectric barium titanate in the rhombohedral phase
In: GAMM-Mitteilungen 38 (2015), p. 132-146
ISSN: 0936-7195
DOI: 10.1002/gamm.201510007
URL: http://onlinelibrary.wiley.com/doi/10.1002/gamm.201510007/abstract
Endres F., Steinmann P.:
Molecular statics simulations of head to head and tail to tail nanodomains of rhombohedral barium titanate
In: Computational Materials Science 97 (2015), p. 20-25
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2014.10.001
Mokarram H., Saxena P., Steinmann P.:
Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials
In: International Journal of Solids and Structures 58 (2015), p. 257-269
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2015.01.010
Mokarram H., Steinmann P.:
Continuum physics of materials with time dependent properties: Reviewing the case of polymer curing
In: Advances in Applied Mechanics - (2015), p. -
ISSN: 0065-2156
Riehl S., Steinmann P.:
Structural optimization of shape and topology using an evolutionary-type advancing front algorithm
3rd Eccomas Young Investigators Conference (Aachen, Germany)
In: Conference Proceedings of the YIC GACM 2015 2015
Davydov D., Young T., Steinmann P.:
On the adaptive finite element analysis of the Kohn-Sham equations: Methods, algorithms, and implementation.
In: International Journal for Numerical Methods in Engineering (2015), p. n/a--n/a
ISSN: 0029-5981
DOI: 10.1002/nme.5140
Cui Y., Sommerfeld M.:
Forces on micron-sized particles randomly distributed on the surface of larger particles and possibility of detachment
In: International Journal of Multiphase Flow 72 (2015), p. 39-52
ISSN: 0301-9322
DOI: 10.1016/j.ijmultiphaseflow.2015.01.006
Wilhelm P., Steinmann P., Rudolph J.:
Fatigue Strain-Life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments
Pressure Vessels and Piping Conference (Boston, 19. July 2015 - 23. July 2015)
In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2015 Pressure Vessels & Piping Conference 2015
Budday S., Steinmann P., Kuhl E., Andres S.:
Primary and secondary instabilities in soft bilayered systems
GAMM Jahrestagung (Lecce)
In: PAMM, Weinheim: 2015
DOI: 10.1002/pamm.201510131
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
Wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
7. TA Anwendertreffen Rheologie - Erlangen (Erlangen)
Wilhelm P., Steinmann P., Rudolph J.:
Statistical Models for Estimating Fatigue Lives of Austenitic Stainless Steels in Light Water Reactor Environments
Structural Mechanics in Reactor Technology (Manchester, 10. August 2015 - 14. August 2015)
In: Compacts of the 23th SMiRT Conference 2015
Saxena P., Pelteret JP., Steinmann P.:
Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure
In: European Journal of Mechanics A-Solids 50 (2015), p. 132-151
ISSN: 0997-7538
DOI: 10.1016/j.euromechsol.2014.10.005
Sitzmann S., Willner K., Wohlmuth BI.:
A dual Lagrange method for contact problems with regularized frictional contact conditions: Modelling micro slip
In: Computer Methods in Applied Mechanics and Engineering 285 (2015), p. 468-487
ISSN: 0045-7825
DOI: 10.1016/j.cma.2014.11.022
Laumer T., Stichel T., Riedlbauer DR., Amend P., Mergheim J., Schmidt M.:
Realization of multi-material polymer parts by simultaneous laser beam melting
In: Journal of Laser Micro Nanoengineering 10 (2015), p. 140-147
ISSN: 1880-0688
DOI: 10.2961/jlmn.2015.02.0006
Wilhelm P., Steinmann P., Rudolph J.:
Statistical Analysis of Fatigue Data for Austenitic Stainless Steels in Water Environments
Annual Meeting on Nuclear Technology (Berlin, 5. May 2015 - 7. May 2015)
In: Compacts of the 46th AMNT 2015
Schmidt U., Mergheim J., Steinmann P.:
Identification of elastoplastic microscopic material parameters within a homogenization scheme
In: International Journal for Numerical Methods in Engineering 104 (2015), p. 391–407
ISSN: 0029-5981
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magneto-sensitive elastomers
10th Annual European Rheology Conference (Nantes, 14. April 2015 - 17. April 2015)
Schmidt U., Steinmann P., Mergheim J.:
Two-scale elastic parameter identification from noisy macroscopic data
In: Archive of Applied Mechanics (2015)
ISSN: 0939-1533
Riedlbauer DR., Steinmann P., Mergheim J.:
Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage
The 30th International Conference of the Polymer Processing Society (Cleveland)
In: PROCEEDINGS OF PPS-30, Cleveland, USA: 2015
DOI: 10.1063/1.4918512
Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
On the wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
7th ECCOMAS Thematic Conference on Smart Structures and Materials (Ponta Delgada / Azores)
Schuler X., Herter KH., Kammerer M., Rudolph J., Wilhelm P.:
Experimental Investigations on Environmentally Assisted Fatigue of Ferritic and Austenitic Materials Including Dissimilar Metal Welds
Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, 5. October 2015 - 6. October 2015)
In: Materialprüfungsanstalt der Universität Stuttgart (ed.): Manuscripts of the 41th MPA Seminar 2015
Budday S., Steinmann P., Kuhl E.:
Physical biology of human brain development
In: Frontiers in Cellular Neuroscience 9 (2015), p. 1-13
ISSN: 1662-5102
DOI: 10.3389/fncel.2015.00257
Fillep S., Mergheim J., Steinmann P.:
Computational homogenization of rope-like technical textiles
In: Computational Mechanics 55 (2015), p. 577-590
ISSN: 0178-7675
DOI: 10.1007/s00466-015-1124-7
Aurich JC., Zimmermann M., Steinmann P., Schindler S.:
Fertigungsgenauigkeit beim Drehen steigern - Einfluss der Prozessparameter auf die Maßhaltigkeit bei der Trockenbearbeitung
In: VDI-Z Integrierte Produktion 157 (2015), p. 42-45
ISSN: 0341-7255
Budday S., Kuhl E., Hutchinson JW.:
Period-doubling and period-tripling in growing bilayered systems
In: Philosophical Magazine - (2015), p. 1-17
ISSN: 1478-6443
DOI: 10.1080/14786435.2015.1014443
Riehl S., Steinmann P.:
A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm
In: Computer Methods in Applied Mechanics and Engineering 287 (2015), p. 1-30
ISSN: 0045-7825
DOI: 10.1016/j.cma.2015.01.007
Steinmann P.:
Geometrical Foundations of Continuum Mechanics
Berlin Heidelberg: Springer, 2015
(Lecture Notes in Applied Mathematics and Mechanics, Vol.2)
ISBN: 978-3-662-46459-5
DOI: 10.1007/978-3-662-46460-1
Mehnert M., Fillep S., Mergheim J., Steinmann P.:
Computational Homogenization of Micromechanically Resolved Textile Materials
Friederich J., Pfaller S., Steinmann P.:
A web-based tool for the interactive visualization of stresses in an infinite plate with an elliptical hole under simple tension: www.ltm.fau.de/plate .
In: Archive of Applied Mechanics (2015), p. 1-9
ISSN: 0939-1533
DOI: 10.1007/s00419-015-1049-9
Landkammer P., Söhngen B., Loderer A., Krebs E., Steinmann P., Willner K., Hausotte T., Wiederkehr (geb. Kersting) P., Biermann D.:
Experimentelle Verifizierung eines Benchmark-Umformprozesses
In: Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Aachen: 2015
Riehl S., Steinmann P.:
A staggered approach to structural shape and topology optimization
86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce)
In: Proc. Appl. Math. Mech., Weinheim: 2015
DOI: 10.1002/pamm.201510277
Landkammer P., Steinmann P.:
Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients
In: Key Engineering Materials 651 (2015), p. 1381-1386
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.651-653.1381
MHBM S., Bustamante RA., Mokarram H., Steinmann P.:
A novel spectral formulation for transversely isotropic magneto-elasticity
In: Mathematics and Mechanics of Solids - (2015), p. -
ISSN: 1081-2865
Goriely A., Budday S., Kuhl E.:
Chapter two-neuromechanics: From neurons to brain
In: Advances in Applied Mechanics 48 (2015), p. 79--139
ISSN: 0065-2156
DOI: 10.1016/bs.aams.2015.10.002
Davydov D., Steinmann P.:
Reviewing the roots of continuum formulations in molecular systems. Part III: Stresses, Couple Stresses, Heat Fluxes
In: Mathematics and Mechanics of Solids (2014), p. -
ISSN: 1081-2865
DOI: 10.1177/1081286513516480
Luchscheider V., Maidorn M., Willner K.:
Identification of the lamination stack's behavior simulated with a multi-scale homogenization using a progressive contact formulation
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM 2014, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410114
Jerschl M., Willner K.:
Arclength Continuation Methods for the Investigation of Non-linear Oscillating Systems with the Concept of Non-linear Normal Modes
In: Proceedings in Applied Mathematics and Mechanics 14 (2014), p. 287--288
ISSN: 1617-7061
DOI: 10.1002/pamm.201410131
Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
A two-scale simulation method accounting for thermal effects during turning
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM 2014, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410106
Germain S., Landkammer P., Steinmann P.:
A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity
GAMM 2014 (Erlangen, 10. March 2014 - 14. March 2014)
In: PAMM 2014, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410199
Budday S., Steinmann P., Kuhl E.:
A mechanical approach to explain cortical folding phenomena in healthy and diseased brains
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410038
Schmitt O., Friederich J., Steinmann P.:
Manufacturing constraints in parameter-free shape optimization
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410376
Beyer F., Willner K.:
Surface Deformation due to Shear and Ploughing in a Halfspace
In: Proceedings in Applied Mathematics and Mechanics 14 (2014), p. 239-240
ISSN: 1617-7061
DOI: 10.1002/pamm.201410107
URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201410107/pdf
Endres F., Steinmann P.:
Molecular static simulations of ferroelectric material hysteresis behaviour
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410192
Riedlbauer DR., Mergheim J., Steinmann P.:
Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: Proceedings in Applied Mathematics and Mechanics, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410219
Pfaller S., Possart G., Steinmann P.:
Molecular dynamics and finite elements: an approach to couple different worlds
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM, Erlangen, Germany: 2014
DOI: 10.1002/pamm.201410272
Budday S., Steinmann P., Kuhl E.:
The role of mechanics during brain development
In: Journal of the Mechanics and Physics of Solids 72 (2014), p. 75-92
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2014.07.010
Mokarram H., Vu DK., Steinmann P.:
A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer
In: Archive of Applied Mechanics 85 (2014), p. 523 - 537
ISSN: 0939-1533
DOI: 10.1007/s00419-014-0928-9
Vogel FA., Göktepe S., Steinmann P., Kuhl E.:
Modeling and simulation of viscous electro-active polymers
In: European Journal of Mechanics A-Solids 48 (2014), p. 112-128
ISSN: 0997-7538
DOI: 10.1016/j.euromechsol.2014.02.001
Schubert DW., Kaschta J., Horch RE., Walter B., Daenicke J.:
On the failure of silicone breast implants: New insights by mapping the mechanical properties of implant shells
In: Polymer International 63 (2014), p. 172-178
ISSN: 0959-8103
DOI: 10.1002/pi.4619
Mokarram H., Steinmann P.:
Degree of cure-dependent modelling for polymer curing processes at small-strain. Part I: Consistent reformulation
In: Computational Mechanics 53 (2014), p. 777-87
ISSN: 0178-7675
DOI: 10.1007/s00466-013-0929-5
URL: http://link.springer.com/article/10.1007%2Fs00466-013-0929-5
Endres F., Steinmann P.:
An extended molecular statics algorithm simulating the electromechanical continuum response of ferroelectric materials
In: Computational Mechanics 54 (2014), p. 1515-1527
ISSN: 0178-7675
DOI: 10.1007/s00466-014-1072-7
Süß D., Willner K.:
Investigation of a jointed friction oscillator using the multiharmonic balance method
In: Mechanical Systems and Signal Processing 52-53 (2014), p. 73-87
ISSN: 0888-3270
DOI: 10.1016/j.ymssp.2014.08.003
Javili A., Steinmann P., Kuhl E.:
A novel strategy to identify the critical conditions for growth-induced instabilities
In: Journal of the Mechanical Behavior of Biomedical Materials 29 (2014), p. 20-32
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2013.08.017
Davydov D., Pelteret JP., Steinmann P.:
Comparison of several staggered atomistic-to-continuum concurrent coupling strategies
In: Computer Methods in Applied Mechanics and Engineering 277 (2014), p. 260-280
ISSN: 0045-7825
DOI: 10.1016/j.cma.2014.04.013
Riedlbauer DR., Drexler M., Drummer D., Steinmann P., Mergheim J.:
Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12
In: Computational Materials Science 93 (2014), p. 239-248
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2014.06.046
Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
Finite element model to calculate the thermal expansion of the tool and the workpiece in dry turning
6th CIRP Conference on High Performance Cutting (6th CIRP HPC) (Berkeley, USA)
In: Proceedia CIRP 2014
DOI: 10.1016/j.procir.2014.03.087
Vogel FA., Pelteret JP., Käßmair S., Steinmann P.:
Magnetic force and torque on particles subject to a magnetic field
In: European Journal of Mechanics A-Solids 48 (2014), p. 23-37
ISSN: 0997-7538
DOI: 10.1016/j.euromechsol.2014.03.007
Riedlbauer DR., Steinmann P., Mergheim J.:
Thermomechanical finite element simulations of selective electron beam melting processes: Performance considerations
In: Computational Mechanics 54 (2014), p. 109-122
ISSN: 0178-7675
DOI: 10.1007/s00466-014-1026-0
Landkammer P., Steinmann P.:
A fast approach to shape optimization by using the inverse FEM
In: Key Engineering Materials 611 (2014), p. 1404-1412
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.1404
Germain S., Landkammer P., Steinmann P.:
On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity
In: Advanced Modeling and Simulation in Engineering Sciences 1 (2014), p. -
ISSN: 2213-7467
DOI: 10.1186/2213-7467-1-10
Baloglu MV., Nadjafabadi Farahani MH., Rettinger C., Vogel C.:
Unconventional Discretisations of the Temperature Equation in Earth Mantle Dynamics
(2014)
URL: https://www10.cs.fau.de/publications/reports/2014_BalogluFarahaniRettingerVogel-BGCE.pdf
(Techreport)
Javili A., Käßmair S., Steinmann P.:
General imperfect interfaces
In: Computer Methods in Applied Mechanics and Engineering 275 (2014), p. 76-97
ISSN: 0045-7825
DOI: 10.1016/j.cma.2014.02.022
Chatzigeorgiou G., Javili A., Steinmann P.:
Surface electrostatics - Theory and computations
In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), p. -
ISSN: 1364-5021
DOI: 10.1098/rspa.2013.0628
Winter W., Karl M.:
Basic considerations for determining the amount of press fit in acetabular cup endoprostheses as a function of the elastic bone behavior
In: Biomedizinische Technik 59 (2014), p. 413-20
ISSN: 0013-5585
DOI: 10.1515/bmt-2014-0039
Landkammer P., Germain S., Steinmann P.:
Optimum blank design by using the inverse FEM in orthotropic elastoplasticity
GAMM 2014 (Erlangen, Germany, 10. March 2014 - 14. March 2014)
In: PAMM 2014
DOI: 10.1002/pamm.201410164
Wilhelm P., Steinmann P., Rudolph J.:
Compilation of Fatigue Data for Austenitic Stainless Steels
Annual Meeting on Nuclear Technology (Frankfurt am Main, 6. May 2014 - 8. May 2014)
In: Compacts of the 45th AMNT 2014
Davydov D., Voyiatzis E., Chatzigeorgiou G., Liu S., Steinmann P., Böhm M., Müller-Plathe F.:
Size effects in a silica-polystyrene nanocomposite: Molecular dynamics and surface-enhanced continuum approaches
In: Soft Materials 12 (2014), p. S142-S151
ISSN: 1539-4468
DOI: 10.1080/1539445X.2014.959597
Schmaltz S., Willner K.:
Comparison of different biaxial tests for the inverse identification of sheet steel material parameters
In: Strain 50 (2014), p. 389-403
ISSN: 1475-1305
DOI: 10.1111/str
Jerschl M., Süß D., Willner K., Jerschl M.:
Path continuation for the concept of non-linear normal modes using a normal flow algorithm
International Conference on Noise and Vibration Engineering ISMA 2014 (Leuven, Belgium, 15. September 2014 - 17. September 2014)
In: Proceedings of the International Conference on Noise and Vibration Engineering ISMA 2014
Walter B., Saxena P., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers
Second Seminar on the Mechanics of Multifunctional Materials (Bad Honnef, 5. May 2014 - 9. May 2014)
In: Schröder J., Lupascu D.C., Keip M.-A., Brands D. (ed.): Proceedings of the Second Seminar on the Mechanics of Multifunctional Materials 2014
Riedlbauer DR., Steinmann P., Mergheim J.:
Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen
3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nuremberg, Germany, 12. April 2014)
In: 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2014
Riedlbauer DR., Mergheim J., Steinmann P.:
Simulation of the temperature distribution in the selective beam melting process for polymer material
29th International Conference of the Polymer Processing Society (Nuremberg, Germany, 15. July 2013 - 19. July 2013)
In: 29th International Conference of the Polymer Processing Society, USA: 2014
DOI: 10.1063/1.4873876
Zimmermann M., Schindler S., Steinmann P., Aurich JC.:
Drehen metallischer Verbundwerkstoffe
In: wt Werkstattstechnik - Online 104 (2014), p. 33-39
ISSN: 1436-4980
Fillep S., Mergheim J., Steinmann P.:
Microscale modeling and homogenization of rope-like textiles
85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen)
In: Proc. Appl. Math. Mech., Weinheim: 2014
DOI: 10.1002/pamm.201410262
Saxena P., Mokarram H., Walter B., Pelteret JP., Steinmann P.:
Rate dependent deformations in magneto-rheological elastomers: Modelling and experiments
IUTAM Symposium on Thermomechanical-Electromagnetic coupling in solids: Microstructral and Stability Aspects (Paris, 16. June 2014 - 18. June 2014)
Wilhelm P., Steinmann P., Rudolph J.:
Discussion of Fatigue Data for Austenitic Stainless Steels
Pressure Vessels and Piping Conference (Anaheim, 20. July 2014 - 24. July 2014)
In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2014 Pressure Vessels & Piping Conference 2014
Riehl S., Friederich J., Scherer M., Meske R., Steinmann P.:
On the discrete variant of the traction method in parameter-free shape optimization
In: Computer Methods in Applied Mechanics and Engineering 278 (2014), p. 119-144
ISSN: 0045-7825
DOI: 10.1016/j.cma.2014.05.009
Rudolph J., Baylac G., Wilhelm P., Wintle J., Buennagel E.:
Recent Amendments of EN13445-3, Clause 18 and Related Annexes: Detailed Assessment of Fatigue Life
Pressure Vessels and Piping Conference (Anaheim, 20. July 2014 - 24. July 2014)
In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2014 Pressure Vessels & Piping Conference 2014
Jerschl M., Süß D., Willner K., Jerschl M.:
Numerical Continuation Methods for the Concept of Non-linear Normal Modes
32nd IMAC Conference and Exposition on Structural Dynamics, 2014 (Orlando, USA)
In: Dynamics of Civil Structures 2014
DOI: 10.1007/978-3-319-04546-7_3
Süß D., Jerschl M., Willner K., Jerschl M.:
Numerical Investigation of Jointed Oscillators using Harmonic Balance Techniques
International Conference on Noise and Vibration Engineering ISMA 2014 (Leuven, Belgium, 15. September 2014 - 17. September 2014)
In: Proceedings of the International Conference on Noise and Vibration Engineering ISMA 2014
Saxena P., Mokarram H., Steinmann P.:
Nonlinear magneto-viscoelasticity of transversally isotropic magneto-active polymers
In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), p. -
ISSN: 1364-5021
DOI: 10.1098/rspa.2014.0082
URL: http://rspa.royalsocietypublishing.org/content/470/2166/20140082.short?rss=1
Walter B., Daenicke J., Horch RE., Kaschta J., Schubert DW.:
Neuartige Studien zu Silikon-Brustimplantaten
Würzburger Tage 2012 (Würzburg, 13. September 2012 - 14. September 2012)
Wilhelm P., Steinmann P., Rudolph J.:
Statistical Model of Water Environment Effects on the Fatigue Behavior of Austenitic Stainless Steels
Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, 6. October 2014 - 7. October 2014)
In: Materialprüfungsanstalt der Universität Stuttgart (ed.): Manuscripts of the 40th MPA Seminar 2014
Mokarram H., Vu DK., Steinmann P.:
On characterization of the electro-mechanically coupled properties of VHB polymer
SMMM2 (Bad Honnef, Germany)
In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
Mokarram H., Saxena P., Steinmann P.:
Finite strain modelling for the curing process in magneto-viscoelasticity
22nd ACME (University of Exeter, UK)
In: Proceedings on 22nd ACME Conference on Computational Mechanics 2014
Landkammer P., Germain S., Steinmann P.:
On inverse form finding for orthotropic plasticity
In: Computer Assisted Mechanics and Engineering Sciences 20 (2014), p. 337-348
ISSN: 1232-308X
Roth A., Herbst M., Rudolph J., Wilhelm P., Schuler X., Herter KH., Kammerer M., Weißenberg T.:
Environmental Influences on the Fatigue Assessment of Austenitic and Ferritic Steel Components Including Welds
Pressure Vessels and Piping Conference (Anaheim, 20. July 2014 - 24. July 2014)
In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2014 Pressure Vessels & Piping Conference 2014
Schubert DW., Kaschta J., Horch RE., Walter B., Daenicke J., Wichert F.:
Eine Geschichte des Versagens - der PIP Skandal
Würzburger Tage 2014 (Würzburg, 20. March 2014 - 21. March 2014)
Leugering G., Friederich J., Steinmann P.:
Adaptive finite elements based on sensitivities for topological mesh changes
In: Control and Cybernetics 43 (2014), p. 279-306
ISSN: 0324-8569
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85018838294&origin=inward
Possart G.:
Mechanical Interphases in Adhesives. Experiment, Modelling and Simulation (Dissertation, 2014)
Sitzmann S., Willner K., Wohlmuth BI.:
A dual Lagrange method for contact problems with regularized contact conditions
In: International Journal for Numerical Methods in Engineering 99 (2014), p. 221-238
ISSN: 0029-5981
DOI: 10.1002/nme.4683
Cui Y., Schmalfuß S., Zellnitz S., Sommerfeld M., Urbanetz N.:
Towards the optimisation and adaptation of dry powder inhalers
In: International Journal of Pharmaceutics 470 (2014), p. 120-132
ISSN: 0378-5173
DOI: 10.1016/j.ijpharm.2014.04.065
Luchscheider V., Willner K., Maidorn M.:
A material model for lamination stacks based on rough contacts
2014 4th International Electric Drives Production Conference, EDPC 2014
DOI: 10.1109/EDPC.2014.6984431
Budday S., Kuhl E., Raybaud C.:
A mechanical model predicts morphological abnormalities in the developing human brain
In: Scientific Reports 4 (2014)
ISSN: 2045-2322
DOI: 10.1038/srep05644
Wilhelm P., Steinmann P., Rudolph J.:
Einbindung der neuen Regelwerksanforderungen in lokale Fatigue-Monitoring Lösungen
Workshop of Materials Testing Institute University of Stuttgart: „Ermüdungsverhalten von Bauteilen in Leichtwasserreaktoren unter Berücksichtigung des Kühlmediums“ (Stuttgart, 10. September 2014 - 10. September 2014)
In: Materialprüfungsanstalt der Universität Stuttgart (ed.): MPA Workshop 2014: Ermüdungsverhalten 2014
Süß D., Willner K.:
Investigation of a Bolted Friction Resonator in the Frequency Domain
85th GAMM Annual Meeting (Erlangen, Germany)
In: Proceedings of the 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Erlangen, Germany: 2014
Endres F., Steinmann P.:
On an atomistic scale finite element method for the simulation of ferroelectric functional materials
2nd Seminar on the mechanics of multifunctional materials (Bad Honnef, Germany)
In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
Pelteret JP., Saxena P., Walter B., Davydov D., Steinmann P.:
Towards a computational model of magneto-sensitive polymers
85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen, 10. March 2014 - 14. March 2014)
Schmitt O., Friederich J., Steinmann P.:
Manufacturing constraints in parameter-free sensitivity-based shape optimization
1st International Conference on Engineering and Applied Sciences Optimization (OPT-i) (Kos Island, Greece, 4. June 2014 - 6. June 2014)
In: Proceedings of 1st International Conference on Engineering and Applied Sciences Optimization 2014
Walter B., Saxena P., Kaschta J., Schubert DW., Steinmann P.:
Magneto-Sensitive Elastomers: An Experimental Point of View
85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen)
Riehl S., Steinmann P.:
An integrated approach to shape optimization and mesh adaptivity based on material residual forces
In: Computer Methods in Applied Mechanics and Engineering 278 (2014), p. 640-663
ISSN: 0045-7825
DOI: 10.1016/j.cma.2014.06.010
Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
Thermo-elastic deformations of the workpiece when dry turning aluminum alloys - A finite element model to predict thermal effects in the workpiece
In: CIRP Journal of Manufacturing Science and Technology 7 (2014), p. 233-245
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2014.04.006
Saxena P., Walter B., Kaschta J., Fey T., Steinmann P., Schubert DW.:
Thermodynamically Consistent Model to Predict the Magneto-Rheological Behavior of Magneto-Sensitive Elastomers
9th Annual European Rheology Conference (Karlsruhe, 8. April 2014 - 11. April 2014)
Riehl S., Friederich J., Steinmann P.:
On regularization in parameter-free shape optimization
85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen, 10. March 2014 - 14. March 2014)
In: Proc. Appl. Math. Mech., Weinheim: 2014
DOI: 10.1002/pamm.201410375
Ravnik J., Hribersek M., Vogel FA., Steinmann P.:
Numerical simulation of particles movement in cellular flows under the influence of magnetic forces
In: International Journal of Simulation Modelling 13 (2014), p. 300-311
ISSN: 1726-4529
DOI: 10.2507/IJSIMM13(3)4.268
Walter B., Saxena P., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
On the Preparation, Characterization, Modeling and Simulation of Magneto-Sensitive Elastomers
14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (Granada, 7. July 2014 - 11. July 2014)
Saxena P., Vu DK., Steinmann P.:
On rate-dependent dissipation effects in electro-elasticity
In: International Journal of Non-Linear Mechanics 62 (2014), p. 1-11
ISSN: 0020-7462
DOI: 10.1016/j.ijnonlinmec.2014.02.002
Luchscheider V., Maidorn M., Willner K.:
Computation of the effective lamination stack's behavior considering the contact simulation with a multi-scale homogenization
Joint 11th World Congress on Computational Mechanics, WCCM 2014, the 5th European Conference on Computational Mechanics, ECCM 2014 and the 6th European Conference on Computational Fluid Dynamics, ECFD 2014
URL: https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=84923963712&origin=inward
Chatzigeorgiou G., Javili A., Steinmann P.:
Multiscale modeling for composites with energetic interfaces at the micro or nanoscale
In: Mathematics and Mechanics of Solids - (2013), p. -
ISSN: 1081-2865
DOI: 10.1177/1081286513516122
Diel S., Huber O., Steinmann P., Winter W.:
Design and validation of a new fixture for the shear testing of cellular solids
In: Archive of Applied Mechanics 84 (2013), p. 309-321
ISSN: 0939-1533
DOI: 10.1007/s00419-013-0801-2
Schmaltz S., Landkammer P., Beyer F., Kumor D., Rademacher A., Blum H., Steinmann P., Willner K.:
Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung
In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (ed.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, Bamberg: Meisenbach, 2013, p. 53-68
ISBN: 978-3-87525-353-5
Breitsprecher T., Hense R., Beyer F., Biermann D., Wartzack S., Willner K.:
Sensitivitätsanalyse der tribologischen Eigenschaften gefräster Oberflächenstrukturen bei der Blechmassivumformung
In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (ed.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, Bamberg: Meisenbach, 2013, p. 121-136
ISBN: 978-3-87525-353-5
Aurich JC., Zimmermann M., Schindler S., Steinmann P.:
Analysis of the machining accuracy when dry turning via experiments and finite element simulations
In: Production Engineering 8 (2013), p. 41-50
ISSN: 0944-6524
DOI: 10.1007/s11740-013-0508-9
Steinmann P.:
On generalized crystal-plasticity based on defect-densities in a second-order continuum
In: GAMM-Mitteilungen 36 (2013), p. 203-218
ISSN: 0936-7195
DOI: 10.1002/gamm.201310012
Javili A., McBride A., Steinmann P.:
Numerical modelling of thermomechanical solids with highly conductive energetic interfaces
In: International Journal for Numerical Methods in Engineering 93 (2013), p. 551-574
ISSN: 0029-5981
DOI: 10.1002/nme.4402
Javili A., Chatzigeorgiou G., Steinmann P.:
Computational homogenization in magneto-mechanics
In: International Journal of Solids and Structures 50 (2013), p. 4197-4216
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.08.024
Konchakova N., Balle F., Müller R., Steinmann P., Eifler D., Barth FJ.:
Numerical analysis of the mechanical behavior of lightweight metal-CFRP joints
In: Advanced Engineering Materials 15 (2013), p. 846-852
ISSN: 1438-1656
DOI: 10.1002/adem.201200286
Wang J., Steinmann P.:
On the modelling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. I: Theoretical formulation
In: Continuum Mechanics and Thermodynamics 26 (2013), p. 563-592
ISSN: 0935-1175
DOI: 10.1007/s00161-013-0319-4
Konchakova N., Müller R., Steinmann P., Balle F., Eifler D., Barth FJ.:
Simulation of adhesive joints by viscoelastic interface material model
In: Advanced Engineering Materials 15 (2013), p. 861-867
ISSN: 1438-1656
DOI: 10.1002/adem.201200374
Javili A., McBride AT., Mergheim J., Steinmann P., Schmidt U.:
Micro-to-macro transitions for continua with surface structure at the microscale
In: International Journal of Solids and Structures 50 (2013), p. 2561-2572
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.03.022
Javili A., Dell´Isola F., Steinmann P.:
Geometrically nonlinear higher-gradient elasticity with energetic boundaries
In: Journal of the Mechanics and Physics of Solids 61 (2013), p. 2381-2401
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2013.06.005
Prechtel M., Leugering G., Steinmann P., Stingl M.:
A cohesive crack propagation model: Mathematical theory and numerical solution
In: Communications on Pure and Applied Analysis 12 (2013), p. 1705-1729
ISSN: 1534-0392
DOI: 10.3934/cpaa.2013.12.1705
Davydov D., Steinmann P.:
Reviewing the roots of continuum formulations in molecular systems. Part II: Energy and angular momentum balance equations
In: Mathematics and Mechanics of Solids - (2013), p. -
ISSN: 1081-2865
DOI: 10.1177/108128651349030
Pfaller S., Rahimi M., Possart G., Steinmann P., Müller-Plathe F., Böhm MC.:
An Arlequin-based method to couple molecular dynamics and finite element simulations of amorphous polymers nanocomposites
In: Computer Methods in Applied Mechanics and Engineering 260 (2013), p. 109-129
ISSN: 0045-7825
DOI: 10.1016/j.cma.2013.03.006
Hauer F., Willner K.:
Development of a friction law respecting plastic surface smoothing
In: Key Engineering Materials 554-557 (2013), p. 1471-1477
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.1471
Mokarram H., Steinmann P.:
More Hyperelastic models for rubber-like materials: Consistent tangent operators and Comparative Study
In: Journal of the Mechanical Behavior of Materials 22 (2013), p. 27-50
ISSN: 0334-8938
DOI: 10.1515/jmbm-2012-0007
Steinmann P., Papastavrou A., Kuhl E.:
On the mechanics of continua with boundary energies and growing surfaces
In: Journal of the Mechanics and Physics of Solids 61 (2013), p. 1446-1463
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2013.01.007
Fillep S., Mergheim J., Steinmann P.:
Computational modelling and homogenization of technical textiles
In: Engineering Structures 50 (2013), p. 68-73
ISSN: 0141-0296
DOI: 10.1016/j.engstruct.2013.01.025
Kraus M., Rajagopal A., Steinmann P.:
Investigations on the polygonal finite element method: Constrained adaptive Delaunay tessellation and conformal interpolants
In: Computers & Structures 120 (2013), p. 33-46
ISSN: 0045-7949
DOI: 10.1016/j.compstruc.2013.01.017
Wang J., Steinmann P.:
Finite element simulation of the magneto-mechanical response of a magnetic shape memory alloy sample
In: Philosophical Magazine 93 (2013), p. 2630-2653
ISSN: 1478-6435
DOI: 10.1080/14786435.2013.782443
Steinmann P., Pfaller S., Possart G., Müller-Plathe F., Rahimi M., Böhm MC.:
Molecular dynamics meets finite elements: An approach for coupled simulations of nanocomposites
Hybrid Particle-Continuum Methods in Computational Materials Physics (Juelich, Germany, 4. March 2013 - 7. March 2013)
In: Forschungszentrum Jülich GmbH, Zentralbibliothek (ed.): NIC Series, Jülich: 2013
Davydov D., Javili A., Steinmann P.:
On molecular static and surface-enhanced continuum modeling of nano-structures
In: Computational Materials Science 69 (2013), p. 510-519
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2012.11.053
Mergheim J., Steinmann P.:
Phenomenological modelling of self-healing polymers
In: Computational Mechanics 52 (2013), p. 681-692
ISSN: 0178-7675
DOI: 10.1007/s00466-013-0840-0
Winter W., Klein D., Karl M.:
Effect of model parameters on finite element analysis of micromotions in implant dentistry
In: The Journal of oral implantology 39 (2013), p. 23-29
ISSN: 0160-6972
DOI: 10.1563/AAID-JOI-D-11-00221.
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5641c2c4ac2f8
Walter B., Saxena P., Kaschta J., Schubert DW., Steinmann P.:
Characterisation of Magneto-Sensitive Elastomers; Material Model meets Experimental Results
13th Bayreuth Polymer Symposium, Bayreuth (Bayreuth, 15. September 2013 - 17. September 2013)
Endres F., Steinmann P.:
On molecular statics simulation of ferroelectric barium titanate
84th GAMM Annual Meeting
In: Special Issue: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2013
DOI: 10.1002/pamm.201310062
URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201310062/abstract
Daenicke J., Walter B., Horch RE., Kaschta J., Schubert DW.:
Versagen von Silikonbrustimplantaten - Neuartige Kartierung und Aufdeckung von Produkt-Clustern
In: Plastische Chirurgie 13 (2013), p. 155-158
ISSN: 1618-6214
Luchscheider V., Willner K., Maidorn M.:
Development of a contact and a material model of laminated stacks
3rd Electric Drives Production Conference (Nuremberg, Germany, 29. October 2013 - 30. October 2013)
In: Proceeding 3rd International Electric Drives Production Conferenz 2013
DOI: 10.1109/EDPC.2013.6689722
Saxena P., Mokarram H., Steinmann P.:
A theory of finite deformation magneto-viscoelasticity
In: International Journal of Solids and Structures 50 (2013), p. 38863897
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.07.024
Pelteret JP., Davydov D., Javili A., Walter B., Steinmann P.:
Towards a computational model of thermal- and magneto-sensitive polymers
5th International Conference on Computational Methods for Coupled Problems in Science and Engineering (Ibiza, 17. June 2013 - 19. June 2013)
Chatzigeorgiou G., Javili A., Steinmann P.:
Surface Magnetoelasticity
In: Journal of the Mechanics and Physics of Solids - (2013), p. -
ISSN: 0022-5096
Wilhelm P., Steinmann P., Rudolph J.:
Study on Fatigue Analysis for Operational Load Histories
Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, 8. October 2013 - 9. October 2013)
In: Materialprüfungsanstalt der Universität Stuttgart (ed.): Manuscripts of the 39th MPA Seminar 2013
Drexler M., Drummer D., Wudy K., Riedlbauer DR., Steinmann P., Mergheim J.:
Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften
2. Industriekolloquium des SFB 814 (Nürnberg)
In: 2. Industriekolloquium des SFB 814 2013
Schmaltz S., Willner K.:
Sheet steel material parameter identification utilizing a biaxial tensile test and optical full-field measurements
PhotoMechanics (Montpellier, France)
In: PhotoMechanics, Montpellier, France: 2013
Winter W., Klein D., Karl M.:
Micromotion of Dental Implants: Basic Mechanical Considerations
In: Journal of Medical Engineering 2013 (2013), p. -
ISSN: 2314-5129
DOI: 10.1155/2013/265412
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5641bb77de426
Wilhelm P., Steinmann P., Rudolph J.:
Guidelines for Addressing Environmentally Assisted Fatigue in Fatigue Usage Calculation and Further Recommendations
Annual Meeting on Nuclear Technology (Berlin, 14. May 2013 - 16. May 2013)
In: Compacts of the 44th AMNT 2013
Süß D., Willner K., Jerschl M., Jerschl M.:
Investigation of jointed structures using the multiharmonic balance method
Conference of the Society for Experimental Mechanics Series (Montpellier, France, 11. February 2013 - 14. February 2013)
In: Conference Proceedings of the Society for Experimental Mechanics Series 2013
DOI: 10.1007/978-1-4614-6570-6_20
Schmaltz S., Willner K.:
Implementierung und Anpassung eines Materialmodells für FE-Simulationen in der Blechmassivumformung. Colloquium on metal forming
XXXII. Colloquium on metal forming (Donnersbach, Austria)
In: Proceedings of XXXII. Colloquium on metal forming, Donnersbach, Austria: 2013
Schmaltz S., Willner K.:
Material modelling and parameter identification for sheet-bulk metal forming
XII International Conference on Computational plasticity - Fundamentals and Applications (Barcelona, Spain, 3. September 2013 - 5. September 2013)
In: Proceedings of the XII International Conference on Computational plasticity - Fundamentals and Applications, Barcelona, Spain: 2013
Schubert DW., Kaschta J., Horch RE., Walter B., Daenicke J.:
Failure of Silicone Breast Implants – New Insights by Mapping the Mechanical Properties of Implant Shells
European Polymer Federation (Pisa, 16. June 2013 - 21. June 2013)
In: Book of Abstracts 2013
Schubert DW., Horch RE., Kaschta J., Daenicke J., Walter B.:
Failure of Silicone Breast Implants – New Insights by Mapping the Mechanical Properties of Implant Shells
13th Bayreuth Polymer Symposium (Bayreuth, 15. September 2013 - 17. September 2013)
Mergheim J., Possart G., Steinmann P.:
Modeling and simulation of curing and damage in thermosetting adhesives
In: Journal of Adhesion 89 (2013), p. 111
ISSN: 0021-8464
Schubert DW., Horch RE., Kaschta J., Daenicke J., Walter B.:
Failure of Silicone Breast Implants – Novel Insights by Mapping the Mechanical Properties of Implant Shells
Nordic Polymer Days (Helsinki, 29. May 2013 - 31. May 2013)
Fillep S., Mergheim J., Steinmann P.:
Homogenization of heterogeneous, fibre structured materials
COMPLAS XII (Barcelona, Spain, 3. September 2013 - 5. September 2013)
In: COMPLAS XII - XII Inernational Conference on Computational Plasticity. Fundamentals and Applications, Barcelona, Spain: 2013
Fillep S., Orlik J., Bare Z., Steinmann P.:
Homogenization in periodically heterogeneous elastic bodies with multiple micro contact
In: Mathematics and Mechanics of Solids (2013), p. -
ISSN: 1081-2865
DOI: 10.1177/1081286513501104
Prechtel M., Leugering G., Steinmann P., Stingl M.:
Optimal Design of Brittle Composite Materials: a Nonsmooth Approach
In: Journal of Optimization Theory and Applications 155 (2012), p. 962-985
ISSN: 0022-3239
DOI: 10.1007/s10957-012-0094-6
Luchscheider V., Willner K.:
Analysis of the lamination stack influence on the stiffness of stator active component
GAMM 2012 (Darmstadt, Germany)
In: PAMM 2012
DOI: 10.1002/pamm.201210091
Leitz T., Willner K.:
Simulation of the elastohydrodynamic contact with a piezo-viscous fluid
GAMM Annual Meeting (Darmstadt, 26. March 2012 - 30. March 2012)
In: Proc. Appl. Math. Mech. (PAMM) 2012
Germain S., Steinmann P.:
On two different inverse form finding methods for hyperelastic and elastoplastic materials
GAMM 2012 (Darmstadt, Germany)
In: PAMM, Germany: 2012
DOI: 10.1002/pamm.201210122
Friederich J., Leugering G., Steinmann P.:
An adaptive finite element method based on sensitivities for node insertion
In: GAMM-Mitteilungen 35 (2012), p. 175-190
ISSN: 0936-7195
DOI: 10.1002/gamm.201210012
URL: http://onlinelibrary.wiley.com/doi/10.1002/gamm.201210012/full
Chatzigeorgiou G., Javili A., Steinmann P.:
Unified magnetomechanical homogenization framework with application to magnetorheological elastomers
In: Mathematics and Mechanics of Solids (2012), p. -
ISSN: 1081-2865
DOI: 10.1177/1081286512458109
Winter W., Karl M.:
Dehydration-induced shrinkage of dentin as a potential cause of vertical root fractures
In: Journal of the Mechanical Behavior of Biomedical Materials 14 (2012), p. 1-6
ISSN: 1751-6161
DOI: 10.1016/j.jmbbm.2012.05.008
Weber W., Steinmann P., Kuhn G.:
Simulation of 3d Fatigue Crack Propagation Using an Implicit Time Integration Scheme
In: International Journal of Fatigue 50 (2012), p. 2-9
ISSN: 0142-1123
DOI: 10.1016/j.ijfatigue.2012.07.003
Javili A., McBride A., Steinmann P., Reddy BD.:
Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies
In: Philosophical Magazine 92 (2012), p. 3540-3563
ISSN: 1478-6435
DOI: 10.1080/14786435.2012.682175
Diel S., Huber O., Saage H., Steinmann P., Winter W.:
Mechanical Behaviour of a Cellular Composite under Quasi-Static, Static and Cyclic Compression Loading
In: Journal of Materials Science 47 (2012), p. 5635-5645
ISSN: 0022-2461
DOI: 10.1007/s10853-012-6432-0
Mokarram H., Steinmann P., Vu DK.:
Experimental study and numerical modelling of VHB 4910 polymer
In: Computational Materials Science 59 (2012), p. 65-74
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2012.02.027
Javili A., McBride A., Steinmann P.:
Thermomechanics of Solids with Lower-Dimensional Energetics: On the Importance of Surface, Interface and Curve Structures at the Nanoscale. A Unifying Review
In: Applied Mechanics Reviews 65 (2012), p. -
ISSN: 0003-6900
DOI: 10.1115/1.4023012
Vogel FA., Bustamante RA., Steinmann P.:
On some mixed variational principles in electro-elastostatics
In: International Journal of Non-Linear Mechanics 47 (2012), p. 341-354
ISSN: 0020-7462
DOI: 10.1016/j.ijnonlinmec.2011.08.001
Steinmann P., Mokarram H., Possart G.:
Hyperelastic models for rubber-like materials: Consistent tangent operators and suitability for Treloar's data
In: Archive of Applied Mechanics 82 (2012), p. 1183-1217
ISSN: 0939-1533
DOI: 10.1007/s00419-012-0610-z
Mergheim J., Possart G., Steinmann P.:
Modelling and computation of curing and damage of thermosets
In: Computational Materials Science 53 (2012), p. 359-367
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2011.09.013
McBride A., Mergheim J., Javili A., Steinmann P., Bargmann S.:
Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch
In: Journal of the Mechanics and Physics of Solids 60 (2012), p. 1221-1239
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2012.01.003
Hauer F., Willner K.:
Halfspace Simulation of Rough Surface Contact in Metal Forming
10th World Congress on Computational Mechanics (Sao Paulo, Brasil)
In: 10th World Congress on Computational Mechanics 2012
DOI: 10.5151/meceng-wccm2012-18465
Davydov D., Javili A., Steinmann P., McBride A.:
A Comparison of Atomistic and Enhanced Continuum Approaches at Finite Temperature
In: Surface effects in solid mechanics, Germany: 2012
Javili A., McBride A., Steinmann P.:
Computational aspects of thermomechanical solids with Kapitza interfaces
In: Computational Materials Science 65 (2012), p. 542-551
ISSN: 0927-0256
Mokarram H., Steinmann P.:
On finite strain models for nano-filled glassy polymers
ECCMR VII (Dublin, Ireland, 20. September 2011 - 23. September 2011)
In: Proceedings of the 7th European Conference on Constitutive Models for Rubber 2012
DOI: 10.1201/b11687-25
Fillep S., Mergheim J., Steinmann P.:
Homogenization and modelling of technical textiles
ECCOMAS 2012 (Vienna, Austria)
In: European Congress on Computational Methods in Applied Sciences and Engineering Proceedings, Viena, Austria: 2012
Breitsprecher T., Hense R., Hauer F., Wartzack S., Biermann D., Willner K.:
Acquisition of heuristic knowledge for the prediction of the frictional behavior of surface structures created by self-excited tool vibrations
In: Key Engineering Materials 504-506 (2012), p. 963-968
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.963
Hetzler H., Willner K.:
On the influence of contact tribology on brake squeal
In: Tribology International 46 (2012), p. 237-246
ISSN: 0301-679X
DOI: 10.1016/j.triboint.2011.05.019
Fillep S., Mergheim J., Steinmann P.:
On the homogenization of technical textiles
In: Bytes and science, Barcelona: International Center for Numerical Methods in Engineering, 2012, p. -
ISBN: 9788494024320
Konchakova N., Balle F., Müller R., Steinmann P., Eifler D., Barth FJ.:
Numerical analysis of the maximum load level in lightweight metal/fibre-reinforced polymer structures
In: Advanced Engineering Materials accepted (2012), p. -
ISSN: 1438-1656
Leugering G., Friederich J., Steinmann P.:
Adaptive refinement based on asymptotic expansions of finite element solutions for node insertion in 1d
In: GAMM-Mitteilungen 35 (2012), p. 175-190
ISSN: 0936-7195
DOI: 10.1002/gamm.201210012
Vu DK., Steinmann P.:
On 3-D coupled BEM-FEM simulation of nonlinear electro-elastostatics
In: Computer Methods in Applied Mechanics and Engineering 201-204 (2012), p. 82-90
ISSN: 0045-7825
DOI: 10.1016/j.cma.2011.08.024
Schmaltz S., Willner K.:
Material parameter optimization utilizing full-field strain measurement data and the Finite Element Method
Colloquium on metal forming (Donnersbach, Austria)
In: Verformungskundliches Kolloquium Konferenz: XXXI 2012
Schmaltz S., Willner K.:
Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation
ISEM-ACEM-SEM-7th ISEM12-Taipei Conference (Taipei, Taiwan)
In: Proc. of ISEM-ACEM-SEM-7th ISEM12-Taipei Conference, (2012, Taipei, Taiwan: 2012
Germain S., Steinmann P.:
Towards inverse form finding methods for a deep drawing steel DC04
15th ESAFORM Conference (Erlangen, Germany, 14. March 2012 - 16. March 2012)
In: 15th ESAFORM Conference Proceeding 2012
DOI: 10.4028/www.scientific.net/KEM.504-506.619
Luchscheider V., Willner K., Maidorn M.:
Development of a model to describe the stiffness of an electric motor lamination stack
2012 2nd International Electric Drives Production Conference (EDPC 2012) (Nuremberg, Germany, 15. October 2012 - 18. October 2012)
In: Proceedings, 2nd International Electric Drives Production Conference (EDPC 2012) 2012
DOI: 10.1109/EDPC.2012.6425107
Süß D., Willner K.:
Multiharmonic Balance Analysis of a Jointed Friction Oscillator
ECCOMAS, 2012 (Vienna, Austria, 10. September 2012 - 14. September 2012)
In: Proceedings of the ECCOMAS 2012
Zimmermann M., Schindler S., Steinmann P., Aurich JC.:
Analysis of thermo-mechanical effects on the machining accuracy when turning aluminum alloys
9th International Conference on High Speed Machining (Spain)
In: Proceedings of the 9th International Conference on High Speed Machining 2012
Germain S., Steinmann P.:
On a recursive algorithm for avoiding mesh distortion in inverse form finding
In: Journal of the Serbian Society for Computational Mechanics 6 (2012), p. 216-234
ISSN: 1820-6530
Hochradel K., Rupitsch S., Sutor A., Lerch R., Vu DK., Steinmann P.:
Dynamic performance of dielectric elastomers utilized as acoustic actuators
In: Applied Physics A-Materials Science & Processing (2012), p. -
ISSN: 0947-8396
DOI: 10.1007/s00339-012-6837-2
Wang J., Dai HH.:
An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. I. asymptotic equations and a two-phase solution
In: Mechanics of Materials 45 (2012), p. 117-134
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2011.12.001
Riedlbauer DR., Mergheim J., Steinmann P., McBride A.:
Macroscopic modelling of the selective beam melting process
83rd GAMM (Darmstadt, Germany)
In: Proceedings in Applied Mathematics and Mechanics, Darmstadt, Germany: 2012
Lehmann E., Schmaltz S., Germain S., Fassmann D., Weber C., Loehnert S., Schaper M., Bach FW., Steinmann P., Willner K., Wriggers P.:
Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data
15th ESAFORM Conference (Erlangen, Germany, 14. March 2012 - 16. March 2012)
In: 15th ESAFORM Conference Proceeding 2012
DOI: 10.4028/www.scientific.net/KEM.504-506.993
Kraus M., Steinmann P.:
Finite element formulations for 3d convex polyhedra in nonlinear continuum mechanics
In: International Journal of Computational Methods in Engineering Science and Mechanics 19 (2012), p. 121-134
ISSN: 1550-2287
Luchscheider V., Willner K.:
Development of a contact model for an electric motor lamination stack
ECCOMAS 2012 -- European Congress on Computational Methods in Applied Sciences and Engineering (Vienna, Austria, 10. September 2012 - 14. September 2012)
In: ECCOMAS 2012 -- European Congress on Computational Methods in Applied Sciences and Engineering, e--Book Full Papers 2012
Davydov D., Steinmann P.:
Reviewing the roots of continuum formulations in molecular systems. Part I: Particle dynamics, statistical physics, mass and linear momentum balance equations
In: Mathematics and Mechanics of Solids (2012), p. -
ISSN: 1081-2865
Mokarram H., Steinmann P.:
Extension of the Arruda-Boyce model to the modelling of the curing process of polymers
GAMM 2011 (Graz, Austria)
In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weiheim: 2011
DOI: 10.1002/pamm.201110186
Steinmann P.:
Geometrically Nonlinear Gravito-Elasticity: Hyperelastostatics Coupled to Newtonian Gravitation
In: International Journal of Engineering Science 49 (2011), p. 1452-1460
ISSN: 0020-7225
DOI: 10.1016/j.ijengsci.2011.03.017
Wang J., Dai HH.:
An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. II. analytical solutions for the outer loop and inner loops
In: Mechanics of Materials 45 (2011), p. 83-102
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2011.11.004
Pfaller S., Possart G., Steinmann P., Rahimi M., Müller-Plathe F., Böhm MC.:
A comparison of staggered solution schemes for coupled particle-continuum systems modeled with the Arlequin method
In: Computational Mechanics 49 (2011), p. 565
ISSN: 0178-7675
DOI: 10.1007/s00466-011-0657-7
Bargmann S., McBride A., Steinmann P.:
Models of Solvent Penetration in Glassy Polymers With an Emphasis on Case II Diffusion. A Comparative Review
In: Applied Mechanics Reviews 64 (2011), p. (1-13)
ISSN: 0003-6900
DOI: 10.1115/1.4003955
McBride A., Javili A., Steinmann P., Bargmann S.:
Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion
In: Journal of the Mechanics and Physics of Solids 59 (2011), p. 2116-2133
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2011.06.002
Steinmann P., McBride A., Bargmann S., Javili A.:
A Deformational and Configurational Framework for Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion
In: International Journal of Non-Linear Mechanics 47 (2011), p. 215-227
ISSN: 0020-7462
DOI: 10.1016/j.ijnonlinmec.2011.05.009
Rahimi M., Karimi-Varzaneh HA., Böhm MC., Müller-Plathe F., Pfaller S., Possart G., Steinmann P.:
Nonperiodic stochastic boundary conditions for molecular dynamics simulations of materials embedded into a continuum mechanics domain
In: Journal of Chemical Physics 134 (2011), p. 154108
ISSN: 0021-9606
DOI: 10.1063/1.3576122
Javili A., Steinmann P.:
A finite element framework for continua with boundary energies. Part III: The thermomechanical case
In: Computer Methods in Applied Mechanics and Engineering 200 (2011), p. 1963-1977
ISSN: 0045-7825
DOI: 10.1016/j.cma.2010.12.013
Süß D., Willner K.:
Parameter identification for nonlinear dynamical systems using multiharmonic balance techniques
GAMM-Jahrestagung 2011 (Graz, Austria)
In: Proceedings of Applied Mathematics and Mechanics (PAMM) 2011
McBride A., Bargmann S., Steinmann P.:
Geometrically nonlinear continuum thermomechanics coupled to diffusion: a framework for case II diffusion
In: Advances in Extended and Multifield Theories for Continua, Berlin: Springer Verlag, 2011, p. 89-107 (Lecture Notes in Applied and Computational Mechanics, Vol.59)
ISBN: 9783642227370
DOI: 10.1007/978-3-642-22738-7_5
URL: http://www.springerlink.com/content/660628786906r687/
Germain S., Steinmann P.:
Shape Optimization for Anisotropic Elastoplasticity in Logarithmic Strain Space
XI International Conference on Computational plasticity - Fundamentals and Applications (Barcelona, Spain, 7. September 2011 - 9. September 2011)
In: COMPLAS XI Proceeding (CD) 2011
Schmaltz S., Willner K.:
Identification of the yield surface for sheet steel using an optical measurement system
Chemnitz (Germany, 25. May 2011 - 28. May 2011)
In: Proceedings of the 10th Youth Symposium on Experimental Solid Mechanics 2011
Schmaltz S., Willner K.:
Optimization of elastic material parameters of sheet metal with FEMU and DIC
82nd GAMM Annual Meeting (Graz, Austria)
In: PAMM 2011 2011
Hribersek M., Steinmann P., Ravnik J., Vogel FA.:
Numerical simulation of particles movement in cellular flows under the influence of magnetic forces
GAMM 2011 (Graz, Austria)
In: Proceedings of the 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics, Graz, Austria: 2011
DOI: 10.1002/pamm.201110276
Schmidt U., Mergheim J., Steinmann P.:
Computational Homogenization and Parameter-Identification for Heterogeneous Inelastic Materials
GAMM 2011 (Graz, Austria)
In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weinheim: 2011
DOI: 10.1002/pamm.201110447
Schmaltz S., Willner K.:
Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU
XI International Conference on Computational plasticity - Fundamentals and Applications (Barcelona, Spain, 7. September 2011 - 9. September 2011)
In: COMPLAS XI Proceeding (CD) 2011
Hauer F., Vierzigmann U., Willner K., Engel U.:
Numerical simulation of friction in metal forming using a halfspace model
14th International ESAFORM Conference on Material Forming (Belfast, UK)
In: AIP Conf. Proc. 1536 2011
DOI: 10.1063/1.3589767
Hauer F., Willner K.:
Elastic-plastic halfspace simulation
GAMM 2011
In: PAMM 2011, Weinheim: 2011
DOI: 10.1002/pamm.201110101
Mokarram H., Steinmann P.:
Modelling and simulation of the curing process of polymers by a modified formulation of the Arruda-Boyce model
In: Archives of Mechanics 63 (2011), p. 621-633
ISSN: 0373-2029
Vu DK., Steinmann P.:
On the spatial and material motion problems in nonlinear electro-elastostatics with consideration of free space
In: Mathematics and Mechanics of Solids 17 (2011), p. 803-823
ISSN: 1081-2865
DOI: 10.1177/1081286511430161
Bargmann S., McBride A., Steinmann P.:
Computational modeling of case II diffusion in polymeric materials
24th Nordic Seminar on Computational Mechanics (Helsinki, Finland)
In: Proceedings of the 24th Nordic Seminar on Computational Mechanics 2011
Fillep S., Steinmann P.:
Microscale modelling and homogenization of fiber structured materials
82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Graz, Austria)
In: Proceedings of Applied Mathematics and Mechanics (PAMM) 2011
Hauer F., Willner K.:
Halfspace modeling of elastic-plastic contact of rough surfaces
Computational Plasticity XI - Fundamentals and Applications (Barcelona, Spain, 7. September 2011 - 9. September 2011)
In: COMPLAS XI 2011
Steinmann P., Ricker S., Aifantis E.:
Unconstrained and Cauchy-Born-constrained atomistic systems: deformational and configurational mechanics
In: Archive of Applied Mechanics 81 (2011), p. 669-684
ISSN: 0939-1533
DOI: 10.1007/s00419-010-0486-8
Germain S., Steinmann P.:
A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space
GAMM 2011 (Graz, Austria)
In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weinheim: 2011
DOI: 10.1002/pamm.201110175
Weber W., Kolk K., Willner K., Kuhn G.:
On the solution of the 3D crack surface contact problem using the boundary element method
In: Key Engineering Materials 454 (2011), p. 11-29
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.454.11
Schmidt U., Mergheim J., Steinmann P.:
Two-Scale Parameter Identification for heterogeneous elastoplastic materials
COMPLAS XI (Barcelona, Spain, 7. September 2011 - 9. September 2011)
In: Proceeding of 11h International Conference on Computational Plasticity, Fundamentals and Applications 2011
Diel S., Huber O.:
Entwicklung und Evaluierung einer Schubversuchsvorrichtung auf Basis einer Schubfeld-konstruktion für statische und zyklische Beanspruchungen
LLC V (Landshut, Germany, 23. February 2011 - 24. February 2011)
In: 5. Landshuter Leichtbau-Colloquium - Leichtbau und nachhaltige Mobilität, Landshut, Germany: 2011
Germain S., Steinmann P.:
On Inverse Form Finding for Anisotropic Elastoplastic Materials
The 14th International ESAFORM Conference on Material Forming (Belfast, UK)
In: AIP Conference Proceedings 2011
DOI: 10.1063/1.3589674
Pfaller S., Steinmann P.:
On bridging domain methods to couple particle- and finite-element-based simulations
80. GAMM-Jahrestagung (Gdansk, Polen)
In: Proceedings of the 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2010
DOI: 10.1002/pamm.200910193
Mergheim J., Steinmann P., Ricker S., Müller R.:
A Comparison of Different Approaches in the Multi-Scale Computation of Configurational Forces
In: International Journal of Fracture (2010), p. accepted
ISSN: 0376-9429
DOI: 10.1007/s10704-010-9525-2
Hauer F., Willner K.:
Normal contact simulation of non-Gaussian fractal surfaces
GAMM-Jahrestagung 2010 (Karlsruhe, Germany)
In: Proceedings of the 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2010
DOI: 10.1002/pamm.201010198
Rajagopal A., Fischer P., Kuhl E., Steinmann P.:
Natural element analysis of the Cahn-Hilliard phase-field model
In: Computational Mechanics 46 (2010), p. 471-493
ISSN: 0178-7675
DOI: 10.1007/s00466-010-0490-4
Schmidt U., Mergheim J., Steinmann P.:
Multi-Scale Parameter Identification
In: International Journal For Multiscale Computational Engineering 10 (2010), p. 327-342
ISSN: 1543-1649
DOI: 10.1615/IntJMultCompEng.2012002175
Fischer P., Mergheim J., Steinmann P.:
On the C1 continuous discretization of nonlinear gradient elasticity: a comparison of NEM and FEM based on Bernstein-Bézier patches
In: International Journal for Numerical Methods in Engineering 82 (2010), p. 1282-1307
ISSN: 0029-5981
DOI: 10.1002/nme.2802
Mokarram H., Possart G., Steinmann P.:
A Finite Strain Framework for the Simulation of Polymer Curing. Part II: Viscoelasticity and shrinkage
In: Computational Mechanics 46 (2010), p. 363
ISSN: 0178-7675
DOI: 10.1007/s00466-010-0479-z
Fischer P., Mergheim J., Steinmann P., Mueller R., Klassen M.:
Isogeometric Analysis of 2D Gradient Elasticity
In: Computational Mechanics (2010)
ISSN: 0178-7675
DOI: 10.1007/s00466-010-0543-8
Prechtel M., Ronda PL., Janisch R., Hartmaier A., Leugering G., Steinmann P., Stingl M.:
Simulation of fracture in heterogeneous elastic materials with cohesive zone models
In: International Journal of Fracture (2010)
ISSN: 0376-9429
DOI: 10.1007/s10704-010-9552-z
Winter Werner, Steinmann Paul, Wichmann Manfred, Krafft T., Karl Matthias:
Quality of alveolar bone - Structure dependant material properties and design of a novel measurement technique
World Congress of Biomechanics VI (Singapore, 1. August 2010 - 6. August 2010)
In: IFMBE Proceedings 31, Berlin, Heidelberg, New York: 2010
DOI: 10.1007/978-3-642-14515-5_242
Javili A., Steinmann P.:
On thermomechanical solids with boundary structures
In: International Journal of Solids and Structures 47 (2010), p. 3245-3253
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2010.08.009
Weber W., Willner K., Kuhn G.:
Numerical analysis of the influence of crack surface roughness on the crack path
In: Engineering Fracture Mechanics 77 (2010), p. 1708-1720
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2010.03.024
Süß D., Geisler J., Willner K.:
Numerical and experimental investigations of dynamic contact phenomena in jointed structures
GAMM-Jahrestagung 2010 (Karlsruhe, Germany)
In: Proceedings of the 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics 2010
DOI: 10.1002/pamm.201010124
Schmidt U., Mergheim J., Steinmann P.:
Parameter Identification over Multiple Scales
MMM V (Freiburg, Germany)
In: Proceedings of the 5th conference on Multiscale Materials Modelling 2010
Weber W., Kolk K., Kuhn G.:
Acceleration of 3D crack propagation simulation by the utilization of fast BEM-techniques
In: Engineering Analysis With Boundary Elements 33 (2009), p. 1005-1015
ISSN: 0955-7997
DOI: 10.1016/j.enganabound.2009.03.001
Mergheim J., Steinmann P., Ricker S.:
On the Multiscale Computation of Defect Driving Forces
In: International Journal For Multiscale Computational Engineering 7 (2009), p. 457-474
ISSN: 1543-1649
DOI: 10.1615/IntJMultCompEng.v7.i5.70
Mokarram H., Possart G., Steinmann P.:
A Phenomenological Finite Strain Framework for the Simulation of Elastic Curing
ECCMR VI (Dresden, Germany)
In: Proceedings of the 6th European Conference on Constitutive Models for Rubber 2009
Ricker S., Mergheim J., Steinmann P.:
Computational Homogenization of Defect Driving Forces
IUTAM Symposium 08-6 (Erlangen, Germany, 20. October 2008 - 24. October 2008)
In: Proceedings of the IUTAM Symposium on Progress in the Theory and Numerics of Configuration Mechanics (peer reviewed) 2009
DOI: 10.1007/978-90-481-3447-2_23
Rajagopal A., Scherer M., Steinmann P., Sukumar N.:
Smooth conformal alpha-NEM for Gradient Elasticity
In: The International journal of structural changes in solids: mechanics and applications 1 (2009), p. 83-109
ISSN: 2163-8160
Mokarram H., Possart G., Steinmann P.:
A Small-Strain Model to Simulate the Curing of Thermosets
In: Computational Mechanics 43 (2009), p. 769-779
ISSN: 0178-7675
DOI: 10.1007/s00466-008-0344-5
Jäger P., Steinmann P., Kuhl E.:
Towards the treatment of boundary conditions for global crack path tracking in three-dimensional brittle fracture
In: Computational Mechanics 45 (2009), p. 91-107
ISSN: 0178-7675
DOI: 10.1007/s00466-009-0417-0
Mokarram H., Possart G., Steinmann P.:
Finite Strain Viscoelastic Models to Simulate the Curing Process of Polymers
International Conference on Material Modelling I (Dortmund, Germany)
In: Proceedings of 1st International Conference on Material Modelling 2009
Mokarram H., Possart G., Steinmann P.:
A Finite Strain Framework for the Simulation of Polymer Curing. Part I: Elasticity
In: Computational Mechanics 44 (2009), p. 621-630
ISSN: 0178-7675
DOI: 10.1007/s00466-009-0397-0
Javili A., Steinmann P.:
A Finite Element Framework for Continua with Boundary Energies. Part I: The Two-Dimensional Case
In: Computer Methods in Applied Mechanics and Engineering 198 (2009), p. 2198-2208
ISSN: 0045-7825
DOI: 10.1016/j.cma.2009.02.008
Hirschberger CB., Ricker S., Steinmann P., Sukumar N.:
Computational Multiscale Modelling of Heterogeneous Material Layers
In: Engineering Fracture Mechanics 76 (2009), p. 793-812
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2008.10.018
Steinmann P., Possart G., Mokarram H.:
Modelling and Simulation of Polymer Curing.
ESMC VII (Lisbon, Portugal)
In: Proceedings of the 7th EUROMECH Solid Mechanics Conference 2009
Mergheim J.:
Simulation of failure processes with the variational multiscale method
ESAFORM XII (Twente, Netherlands)
In: Proceedings of the 12th International ESAFORM Conference on Material Forming 2009
DOI: 10.1007/s12289-009-0441-9
Possart G., Steinmann P., Presser M., Passlack S., Geiß PL., Kopnarski M., Brodyanski A.:
Micro-Macro Characterisation of DGEBA-Based Epoxies on the Way to Polymer Interphase Modelling
In: International Journal of Adhesion and Adhesives 29 (2009), p. 478-487
ISSN: 0143-7496
DOI: 10.1016/j.ijadhadh.2008.10.001
Willner K.:
Constitutive Contact Laws in Structural Dynamics
In: Cmes-Computer Modeling in Engineering & Sciences 48 (2009), p. 303-336
ISSN: 1526-1492
Mergheim J.:
A Variational Multiscale Method to Model Crack Propagation at Finite Strains
In: International Journal for Numerical Methods in Engineering 80 (2009), p. 269-289
ISSN: 0029-5981
DOI: 10.1002/nme.2602
Possart G., Steinmann P., Passlack S., Brodyanski A., Kopnarski M., Presser M., Geiß PL., Bock W.:
Chemical and structural characterisation of DGEBA-based expocies by Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) as a preliminary to polymer interphase characterisation
In: Analytical and Bioanalytical Chemistry 398 (2009), p. 1879-1888
ISSN: 1618-2642
DOI: 10.1007/s00216-009-2639-6
Görke D., Willner K.:
Experimental setup for normal contact stiffness measurement of technical surfaces with geometrical irregularities
In: Experimental Techniques 33 (2009), p. 46-52
ISSN: 0732-8818
DOI: 10.1111/j.1747-1567.2008.00448.x
Steinmann P., Bargmann S.:
Modelling and Simulation of First and Second Sound in Solids
In: International Journal of Solids and Structures 45 (2008), p. 6067-6073
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2008.07.026
Görke D., Willner K.:
Investigations of the influence of geometrical irregularities and roughness on the normal contact stiffness of joints
GAMM-Jahrestagung 2008 (Bremen, Germany)
In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
DOI: 10.1002/pamm.200810275
Mokarram H., Possart G., Steinmann P., Denzer R.:
On phenomenological and micro-mechanical models in finite elasticity and viscoelasticity for rubber-like materials
Zürich (Schweiz)
In: Proceedings of sixth International Congress on Industrial Applied Mathematics (ICIAM07) and GAMM Annual Meeting 2008
DOI: 10.1002/pamm.200700838
Görke D., Willner K.:
Normal contact of fractal surfaces Experimental and numerical investigations
In: Wear 264 (2008), p. 589-598
ISSN: 0043-1648
DOI: 10.1016/j.wear.2007.05.004
Denzer R., Scherer M., Steinmann P.:
An adaptive singular finite element in nonlinear fracture mechanics
International Symposium on Defect and Material Mechanics (Aussois, France)
In: Proceedings of the International Symposium on Defect and Material Mechanics 2008
DOI: 10.1007/978-1-4020-6929-1_17
Hirschberger CB., Sukumar N., Steinmann P.:
Computational Homogenisation of Material Layers with Micromorphic Mesostructure
In: Philosophical Magazine 88 (2008), p. 3603-3631
ISSN: 1478-6435
DOI: 10.1080/14786430802502567
Mergheim J., Steinmann P., Menzel A., Ricker S.:
Continuum-Atomistic Coupling based on Computational Homogenization
GAMM-Jahrestagung 2008 (Bremen, Germany)
In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
DOI: 10.1002/pamm.200810565
Mergheim J.:
A Multiscale Approach for the Modelling of Failure
GAMM-Jahrestagung 2008 (Bremen, Germany)
In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
DOI: 10.1002/pamm.200810555
Mokarram H., Possart G., Steinmann P.:
Towards Modeling the Curing Processes of Thermosets
Bremen, (Germany)
In: Proceedings of 79th GAMM Annual Conference 2008
DOI: 10.1002/pamm.200810427
Görke D., Willner K.:
Measured and Simulated Contact Stiffness of Dry, Metallic Joints
Venice, (Italy, CD-Rom)
In: Extended Abstract in Proceedings of the 8th. World Congress on Computational Mechanics 2008
Scherer M., Denzer R., Steinmann P.:
On a Solution Strategy for Energy-Based Mesh Optimization in Finite Hyperelastostatics
In: Computer Methods in Applied Mechanics and Engineering 197 (2008), p. 609-622
ISSN: 0045-7825
DOI: 10.1016/j.cma.2007.08.005
Willner K.:
Influence of Fractal Surface Parameters on the Elasto-Plastic Contact Behavior of Rough Surfaces
In: Journal of Tribology 130 (2008), p. 1-6
ISSN: 0742-4787
DOI: 10.1115/1.2842243
Willner K.:
Fully Coupled Frictional Contact Using Elastic Halfspace Theory
In: Journal of Tribology 130 (2008), p. 031405 1-6
ISSN: 0742-4787
DOI: 10.1115/1.2913537
Mergheim J., Kuhl E., Steinmann P.:
Towards the Algorithmic Treatment of 3D Strong Discontinuities
In: Communications in Numerical Methods in Engineering 23 (2007), p. 97-108
ISSN: 1069-8299
DOI: 10.1002/cnm.885
Mergheim J., Steinmann P., Kuhl E., Jäger P.:
Modelling and Computation of 3D Discontinuities in Solids
Berlin, (Germany)
In: Proceedings GAMM'06 2007
DOI: 10.1002/pamm.200610172
Ricker S., Mergheim J., Menzel A., Steinmann P.:
Variational issues in the homogenization of discrete systems
Cachan, (France)
In: Proceedings of ECCOMAS 2007
Geisler J., Willner K.:
Modeling of jointed structures using zero thickness interface elements
ICIAM VI / GAMM-Jahrestagung 2007 (Zürich, Switzerland)
In: Proceedings of 6th International Congress on Industrial Applied Mathematics and the 78th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2007
DOI: 10.1002/pamm.200700227
Roger J., Mergheim J., Zimmermann A., Coutellier D.:
Three-dimensional simulation of fatigue crack growth in epoxy resins
Bruchmechanik und Bauteilsicherung (Dresden, Germany)
In: DVM Tagungsband: 2007
Weber W., Kolk K., Kuhn G.:
Fast 3D crack growth analyses by the combination of fast BEM techniques
In: Proceedings of the 17th International Conference on Computer Methods in Mechanics 2007
Ziegler C., Stockinger A., Stoll T., Wittmann S., Weickmann J., Schmidt J., Topic I., Schuck M., Cojutti M., Al-Sheyyab A.:
Produktionsmanagement als effizientes Werkzeug zur Vernetzung von Forschungsprojekten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2007), p. 765-770
ISSN: 0932-0482
DOI: 10.3139/104.101215
Steinmann P., Possart G., Vu DK.:
Numerical Modelling of Nonlinear Electroelasticity
In: International Journal for Numerical Methods in Engineering 70 (2007), p. 685-704
ISSN: 0029-5981
DOI: 10.1002/nme.1902
Kuhn G., Helldörfer B.:
Coupling of 3D Boundary Elements with Curved Finite Shell Elements
GAMM 2006 (Berlin)
DOI: 10.1002/pamm.200610089
Weber W., Kolk K., Kuhn G.:
Efficient crack growth analyzes by combining fast methods for BEM
GAMM-Jahrestagung 2006 (Berlin, Germany)
In: Proceedings of the 77th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2006
DOI: 10.1002/pamm.200610082
Possart, G, Steinmann, P, Vu, D.-K:
Coupled modeling and simulation of electro-elastic materials at large strains
Conference of the SPIE Symposium on Smart Structures and Materials: 'Active Materials: Behavior and Mechanics' (San Diego)
In: Conference of the SPIE Symposium on Smart Structures and Materials 2006 2006
DOI: 10.1117/12.651306
(Conference report)
Willner K., Selvadurai A.:
Surface-Stiffened Halfspace Under the Action of a Horizontally Directed Mindlin Force
In: International Journal of Mechanical Sciences 48 (2006), p. 1072-1079.
ISSN: 0020-7403
DOI: 10.1016/j.ijmecsci.2006.05.008
Willner K., Görke D.:
Contact of rough surfaces - A comparison between experimental and numerical results
Lisbon, (Portugal, CD-ROM)
In: Proceedings of the III. European Conference on Computational Mechanics 2006
Willner K., Hanss M.:
Experimentelle und Angewandte Mechanik - Ein Querschnitt
Tönning: Der Andere Verlag, 2006
ISBN: 3899595343
URL: http://buch.preisorakel.de/vergleich/9783899595345/
Kuhl E., Jäger P., Mergheim J., Steinmann P.:
On the Application of Hansbo's Method for Interface Problems
IUTAM Symposium on Discretization Methods for Evolving Discontinuities (Lyon, France)
In: Proceedings of IUTAM Symposium on Discretization Methods for Evolving Discontinuities 2006
Willner K., Görke D.:
Numerical and experimental investigations of joint deflections under normal load
Tönning: (Der Andere Verlag)
In: Experimentelle und Angewandte Mechanik Ein Querschnitt 2006
Willner K., Görke D.:
Contact of fractal surfaces - Experimental and numerical results
In: Proceedings of GAMM Annual Conference 2006
DOI: 10.1002/pamm.200610120
Mergheim J., Steinmann P.:
A Geometrically Nonlinear FE Approach for the Simulation of Strong and Weak Discontinuities
In: Computer Methods in Applied Mechanics and Engineering 195 (2006), p. 5037-5052
ISSN: 0045-7825
DOI: 10.1016/j.cma.2005.05.057
Willner K.:
Elasto-plastic contact of fractal surfaces
Lecture Notes in Applied and Computational Mechanics
In: Analysis and Simulation of Contact Problems, Berlin: 2006
DOI: 10.1007/3-540-31761-9_34
Willner K., Allgaier R., Gaul L., Keiper W.:
A study on brake squeal using a beam-on-disc model
In: Konstruktion (2005)
ISSN: 0720-5953
URL: https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=33645420010&origin=inward
Kolk K., Kuhn G.:
Advanced simulation of 3D fatigue crack growth by a predictor-corrector procedure considering 3D singularities
ICF XI (Turin, Italy, 20. March 2005 - 25. March 2005)
In: Proceedings of the 11th International Conference of Fracture 2005
Mergheim J., Kuhl E., Steinmann P.:
A Finite Element Method for the Computational Modelling of Cohesive Cracks
In: International Journal for Numerical Methods in Engineering 63 (2005), p. 276-289
ISSN: 0029-5981
DOI: 10.1002/nme.1286
Mergheim J., Steinmann P., Kuhl E.:
A finite element method for cohesive crack modelling
Luxembourg, (28.03-)
In: Proceedings GAMM'05 2005
DOI: 10.1002/pamm.200410156
Kuhn G., Weber W., Kolk K.:
Investigation of 3D crack propagation problems via fast BEM formulations
In: Computational Mechanics 37 (2005), p. 32-40
ISSN: 0178-7675
DOI: 10.1007/s00466-005-0695-0
Mergheim J.:
Computational Modeling of Strong and Weak Discontinuities (Dissertation, 2005)
Allgaier R., Gaul L., Willner K., Keiper W.:
Untersuchungen zum Bremsenquitschen am Balken-Scheibe Modell
In: Konstruktion 6 (2005), p. 1-3
ISSN: 0720-5953
URL: http://www.konstruktion-online.de/kon/article.php?data[article_id]=14217
Steinmann P., Mergheim J.:
A computational method for the FE simulation of strong and weak discontinuities
Oberwolfach, (Germany)
In: Proc. Workshop Gemischte und nicht-standard FE-Methoden 2005
Willner K., Geisler J., Hanss M.:
Fuzzy arithmetical modeling and simulation of structures with uncertain parameters
Workshop on Advanced Computational Engineering Mechanics (Erlangen, Germany)
In: Proceedings of the 2. Workshop on Advanced Computational Engineering Mechanics 2005
Willner K., Selvadurai A., Gaul L.:
On Frictionally Constrained Wing- Cracks
In: Archives of Mechanics 57 (2005), p. 189-207
ISSN: 0373-2029
URL: http://am.ippt.gov.pl/volume-57-2005/issue-23/on-frictionally-constrained-wingcracks/
Willner K., Wohlmuth BI., Klimke A.:
Uncertainty modeling using fuzzy arithmetic based on sparse grids: Applications to dynamic systems
In: International Journal of Uncertainty Fuzziness and Knowledge-Based Systems 12 (2004), p. 745-759
ISSN: 0218-4885
DOI: 10.1142/S0218488504003181
Willner K.:
Elasto-Plastic Normal Contact of Three-Dimensional Fractal Surfaces Using Halfspace Theory
In: Journal of Tribology 126 (2004), p. 28-33
ISSN: 0742-4787
DOI: 10.1115/1.1631019
Mergheim J., Steinmann P., Kuhl E.:
A new approach for the FE modelling of cohesive cracks
ICTAM XXI (Warszawa, Poland)
In: Proceedings of 21st International Congress of Theoretical and Applied Mechanics 2004
Mergheim J., Kuhl E., Steinmann P.:
A Hybrid Discontinuous Galerkin Interface Method for the Computational Modelling of Failure
In: Communications in Numerical Methods in Engineering 20 (2004), p. 511-519
ISSN: 1069-8299
DOI: 10.1002/cnm.689
Hanss M., Willner K.:
Fuzzy arithmetical modeling and simulation of vibrating structures with uncertain parameters
ISMA 2004 (Leuven, Belgium, 20. September 2004 - 22. September 2004)
In: Noise and Vibration Engineering 2004
Ströhla S., Winter W., Kuhn G., Brunnbauer M., Hirschmann M., Körner C., Singer R., Dörfler SM., Otto A.:
Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse
Robuste verkürzte Prozessketten für flächige Leichtbauteile (Erlangen)
In: Robuste verkürzte Prozessketten für flächige Leichtbauteile, Industriekolloquium 2003 des SFB 396, Bamberg: 2003
Mergheim J., Steinmann P., Kuhl E.:
Computational Modelling of Failure with the Discontinuous Galerkin Method
LUXFEM I (Luxembourg, Luxembourg)
In: Proceedings of the 1st International LUXFEM Conference 2003
DOI: 10.1002/pamm.200310425
Mergheim J., Kuhl E., Steinmann P.:
Modelling of failure with a hybrid dG/ interface approach
Padua, (Italien)
In: Proceedings GAMM'03 2003
Willner K.:
Kontinuums- und Kontaktmechanik
Berlin: Springer-Verlag, 2003
ISBN: 978-3-540-43529-7
URL: http://www.springer.com/engineering/book/978-3-540-43529-7
Selvadurai A., Willner K., Gaul L.:
A Receding Contact Problem in Elastostatics
Philadelphia: (American Academy of Mechanics)
In: Proceedings of the Seventh Pan American Congress of Applied Mechanics 2002
Allgaier R., Gaul L., Keiper W., Willner K., Hoffmann N.:
A study on brake squeal using a beam-on-disc model
IMAC-XX: A Conference on Structural Dynamics (Los Angeles, CA)
URL: https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=0036420879∨igin=inward
Mergheim J.:
Parameteridentifizierung des Kalziumauslaugens von Beton (Diploma thesis, 2002)
Kolk K., Kuhn G.:
A Predictor - Corrector Procedure for the Determination of the Shape of 3D Crack Fronts
WCCM V (Vienna)
In: Proceedings of the Fifth World Congress on Computational Mechanics, Austria: 2002
URL: http://wccm.tuwien.ac.at
Allgaier R., Gaul L., Willner K., Hoffmann N.:
A Study on Brake Squeal Using a Beam-On-Disk Model
Los Angeles: (SEM, CD-ROM)
In: Proceedings of IMAC-XX 2002
Willner K., Gaul L.:
Construction of a Finite Element Damping Matrix from Measured Modal Data
Madeira, (Portugal)
In: Proceedings of the International Conference on Structural Dynamics Modelling 2002
Selvadurai A., Willner K., Gaul L.:
On the Indentation of a Membrane Reinforced Elastic Halfspace: Analytical and Computational Approaches
Southampton: (WIT Press, 18. June 2001 - 20. June 2001)
In: Computational Methods in Contact Mechanics V 2001
Willner K.:
Surface Models for Contact Laws
Computational Methods in Contact Mechanics V (, 18. June 2001 - 20. June 2001)
In: Computational Methods in Contact Mechanics V 2001
Kolk K., Kuhn G.:
3D Crack growth simulation
ECCM-2001 (Cracow, Poland,)
In: Proceedings of the 2nd European Conference on Computational Mechanics, Cracow: 2001
Öchsner A., Winter W., Kuhn G.:
Elastic-plastic behaviour of perforated aluminium under tension and compression
In: Technische Mechanik 21 (2001), p. 101-108
ISSN: 0232-3869
Gaul L., Fischer M., Nackenhorst U., Willner K.:
Solution of Multi-Field Problems using Finite and Boundary Element Methods
Wiesbaden, (Germany)
In: Proceedings of the FENET/NAFEMS Seminar: FEM in Structral Dynamics 2001
Willner K.:
Contact Laws for Rough Surfaces
GAMM Jahrestagung 2000
In: Zeitschrift für angewandte Mathematik und Mechanik 2000
Hanss M., Willner K.:
Fuzzy arithmetical approach to the solution of finite element problems with uncertain parameters
In: Mechanics Research Communications 27 (2000), p. 257-272
ISSN: 0093-6413
DOI: 10.1016/S0093-6413(00)00091-4
Selvadurai A., Gaul L., Willner K.:
Indentation of a Functionally Graded Elastic Solid: Application of an Adhesively Bonded Plate Model
Southampton: (WIT Press)
In: Computational Methods in Contact Mechanics IV 1999
Hanss M., Willner K.:
On Using Fuzzy Arithmetic to Solve Problems with Uncertain Parameters
Valenciennes, (France)
In: Proceedings of Euromech 405 Colloquium 1999
Gaul L., Willner K., Hurlebaus S.:
Determination of Material Properties of Plates from Modal ESPI Measurements
IMAC (XVII, 8. February 1999 - 11. February 1999)
In: Proceedings of the International Modal Analysis Conference 1999
Allgaier R., Keiper W., Gaul L., Willner K.:
Mode Lock-In and Friction Modeling
Southampton: (WIT Press)
In: Computational Methods in Contact Mechanics IV 1999
Willner K., Hanss M.:
Finite Element Problems with Uncertain Parameters
Rio (de Janeiro)
In: Proceedings of the 6th Pan-American Congress of Applied Mechanics PACAM VI. 1999
Willner K., Hanss M., Guidati S.:
On Applying Fuzzy Arithmetic to Finite Element Problems
Pensacola Beach, (USA)
In: Proceedings of the 17th Annual Meeting of the North American Fuzzy Information Processing Society NAFIPS 98 1998
Willner K., Gaul L.:
Contact Description by FEM Based on Interface Physics
Barcelona: (CIMNE)
In: Proceedings of COMPLAS V 1997
Willner K.:
Elasto-Plastic Contact of Rough Surfaces
Southampton: (Computational Mechanics Publications, 1. July 1997 - 1. July 1997)
In: Computational Methods in Contact Mechanics III 1997
Gaul L., Willner K., Hurlebaus S.:
Using the ESPI-Technique to Determine Material Properties of Plates
Neu-Ulm: (Dr. Ettemeyer GmbH)
In: Proceedings of the 4th International ESPI User Meeting 1997
Willner K.:
Ein statistisches Modell für den Kontakt metallischer Körper (Dissertation, 1995)
Willner K., Gaul L.:
A Penalty Approach for Contact Description by FEM Based on Interface Physics
Computational Methods in Contact Mechanics II (Computational Mechanics Publications)
In: Computational Methods in Contact Mechanics II 1995
Gaul L., Nackenhorst U., Willner K., Lenz J.:
Nonlinear Vibration Damping of Structures with Bolted Joints
Honolulu, (Hawaii)
In: Proceedings of the 12th IMAC 1994
Knothe K., Strzyzakowski Z., Willner K.:
Rail Vibrations in the High Frequency Range
In: Journal of Sound and Vibration 169 (1994), p. 111-123
ISSN: 0022-460X
DOI: 10.1006/jsvi.1994.1009
Willner K., Strzyzakowski Z.:
Vibrations in the High Frequency Range
In: Zeitschrift für angewandte Mathematik und Mechanik, Weinheim: 1992
DOI: 10.1002/zamm.19920720404
Bolz A., Schaldach M., Winter W.:
Mechanische Aspekte bei der Entwicklung künstlicher Herzklappen
In: Biomedizinische Technik 35 (1990), p. 302-315
ISSN: 0013-5585
DOI: 10.1515/bmte.1990.35.12.302,
Willam K., Steinmann P.:
Computational Failure Mechanics : State-of-the Art and Future Trends
IKOSS, (Baden-Baden, Germany)
In: Proceedings of FEM' 90 Congress 1990

Vorträge

Theses

Jahresberichte